Relación precio calidad excelente muy bien fabricado con un alto grado de acabados exactos, lo recomiendo y lo volvería a comprar
SKU: ZXDGTZHGR20-10001V0
Top highlights
- 1000 mm HGR20 linear guide rail with ball screw and end support included
- Carbon steel rails and GCr15 bearings with HRC62 hardness for durability
- Pre-drilled mounting rail for easy installation and smooth linear motion
AI Summarized from product information
Specifications
- Type HGR20 slide rail
- Material Gcr15 steel
- Length of the rail shaft 39.3 inches / 100 cm
- Nuts BF12 / BK12 nuts
- Mounting hole size M4 x 16 mm
- Static load rating 25.31
Reviews · 4.9
Reviews · 4.9
LUIS M
in
on Oct 31,2026
on Oct 31,2026
1000 mm
anteas
in
on Oct 22,2026
on Oct 22,2026
1000 mm
Matériel très solide d'une qualité supérieure selon, mes critères vous pouvez y aller les yeux fermé !
About this item
Description
Linear guide rail HGR20 - 1000 mm
High precision, smooth operation, and complete set
This linear guide rail consists of two 1000 mm (39.4 inch) long HGR20 rail shafts, four blocks, and a ball screw set. High-quality steel material extends the service life of the shaft and the machine. Smooth movement without deflection, minimal wear, and low noise.
- 1000 mm HGR20 linear guide rail
- High-quality steel material
- Premium linear guide system
- Easy to assemble
HGR20 - 1000 Linear Rail Kits
The linear rail set includes 2 pieces 1000 mm (39.4 inch) long HGR20 rail shafts, 4 blocks and a ball screw set.
High-quality material
This bearing rail consists of a main axle made of carbon steel, a linear rail block made of GCr15 bearing steel, and a housing made of aluminum alloy. It is corrosion-resistant, has high strength, and is wear-resistant.
High hardness & stiffness
Surface chrome plating with excellent rust protection, hardness up to HRC62, with high precision and strong durability.
Complete sliding unit
Professional and technical rail and block that stabilize the original rail. Smooth movement without flexion, minimal wear and quiet operation.
Easy assembly
Pre-drilled holes in the mounting rail bracket make assembly easier and save time and effort.
Wide application
Linear motion rail is perfect for your DIY milling machines, milling machines, lathes, widely used in automation machines, and also suitable for automatic devices and precision measuring instruments.
- Type: HGR20 slide rail
- Material: Gcr15 steel
- Length of the rail shaft: 39.3 inches / 100 cm
- Nuts: BF12 / BK12 nuts
- Mounting hole size: M4 x 16 mm
- Static load rating: 25.31
- Permissible static torque: 0.17 kN·m
- Performance: Smooth movement, low noise
- Net weight: 24 lbs / 11 kg
- Block dimensions (L x W x H): 2.8 x 1.6 x 1.3 inches / 7.3 x 4.2 x 3.4 cm
- 2 x HGR20 - 1000 mm linear guide rails
- 4 x sled blocks
- 1 x RM1605 - 1000mm Ballscrew
- 1 x ball nut
- 1 x BF12 / BK12 nut
- 1 x plum coupling
Linear guide rail HGR20 - 1000 mm
High precision, smooth operation, and complete set
This linear guide rail consists of two 1000 mm (39.4 inch) long HGR20 rail shafts, four blocks, and a ball screw set. High-quality steel material extends the service life of the shaft and the machine. Smooth movement without deflection, minimal wear, and low noise.
- 1000 mm HGR20 linear guide rail
- High-quality steel material
- Premium linear guide system
- Easy to assemble
HGR20 - 1000 Linear Rail Kits
The linear rail set includes 2 pieces 1000 mm (39.4 inch) long HGR20 rail shafts, 4 blocks and a ball screw set.
High-quality material
This bearing rail consists of a main axle made of carbon steel, a linear rail block made of GCr15 bearing steel, and a housing made of aluminum alloy. It is corrosion-resistant, has high strength, and is wear-resistant.
High hardness & stiffness
Surface chrome plating with excellent rust protection, hardness up to HRC62, with high precision and strong durability.
Complete sliding unit
Professional and technical rail and block that stabilize the original rail. Smooth movement without flexion, minimal wear and quiet operation.
Easy assembly
Pre-drilled holes in the mounting rail bracket make assembly easier and save time and effort.
Wide application
Linear motion rail is perfect for your DIY milling machines, milling machines, lathes, widely used in automation machines, and also suitable for automatic devices and precision measuring instruments.
- 2 x HGR20 - 1000 mm linear guide rails
- 4 x sled blocks
- 1 x RM1605 - 1000mm Ballscrew
- 1 x ball nut
- 1 x BF12 / BK12 nut
- 1 x plum coupling
- Type: HGR20 slide rail
- Material: Gcr15 steel
- Length of the rail shaft: 39.3 inches / 100 cm
- Nuts: BF12 / BK12 nuts
- Mounting hole size: M4 x 16 mm
- Static load rating: 25.31
- Permissible static torque: 0.17 kN·m
- Performance: Smooth movement, low noise
- Net weight: 24 lbs / 11 kg
- Block dimensions (L x W x H): 2.8 x 1.6 x 1.3 inches / 7.3 x 4.2 x 3.4 cm
Product guides and documents
Frequently Bought Together
Pre-Black Friday
VEVE Linear Guide HGR 20-1000mm Linear Rail with 4PCS Sliding Blocks
Pre-Black Friday
4.9 100
91 90 €
Get -% off for new user
Each when you buy 0+.
Shop
5,00€ off 1st App Order 99,00€+
In Stock
