Reseñas de clientes para VEVOR Yunque de Acero 30KG, Yunque de Metal 66LBS, Yunque de Herrero Ideal para Metalúrgicos y Herreros para Remachar, Aplanar, Forjar y Formar Metal

In apparenza più che ottimo le prime martellate sono state rette egregiamente , penso che per il prezzo pagato sia un ottimo prodotto.

Very good for the money. This anvil needed some “finishing off”, the casting lines on the horn, the general shape of the horn & all around the edges, I removed the coating & brought it into shape with a sanding flap disc on a grinder, then finished off with some large files. I wanted the coating off all of the main surfaces & all the edges & right angles. This was an easy job & left me with an anvil that is perfect for my own personal use. Now I just need to find or make a stand.

Good tool for workshop but finish quality needs improving or monitoring before dispacthing otherwise it's okay.

This mini anvil is great for what I need. You couldn't go blacksmithing on it because it's only a mini anvil and doesn't have the size, bounce or resilience of a real anvil. BUT, if you want a glorified bench block, as I did, then this anvil is way better than required. It's heavy enough to hammer on and shape metal but light enough to move around the workshop to where needed. The anvil is very cheaply priced and excellent value for money. I would recommend it for light metalworking and also as a generally useful item for when you need somewhere solid to bash things on.

Just what i needed. The size is excellent for my needs and will certainly make my metal items much easier to make.

Come da descrizione

ottimo prezzo. corno arrotondato dell'incudine non perfetto, corno triangolare leggermente deformato. piano di battuta perfetto.

Perfect for my limited space, but well above my expectations - I_ already putting more across it than I would have thought possible

L'enclume est arrivée dans son carton défoncés. Résultat la bigorne est tordue ! Sinon L'enclume est très correct

The anvil was delivered without damage. But the real sizes of the hardy and pritchel holes (34x34mm and diam 32 mm) do not correspond to the sizes indicated on the vevor site (27x27mm and diam 27 mm), nor to the sizes in the user manual (29x29mm and diam 26 mm). It forces to buy more expensive hardy tools meant for larger anvils. Vevor gave me a price reduction of 98€ for this reason. Vevor should adapt their anvils with hardy and prichel hole sizes in proportion with the anvil sizes !!! In this 60kg anvil case they should be rather 25x25mm and diam 20 mm. And it took me 4 hours of grinding to remove a 1 to 2 mm layer from the round horn because the casting was in that zone at the surface full of very small air pockets. This horn had also to be shortened by 10 mm because of presence of larger air pockets in it's end. Rebound and hardness are both ok.