Reseñas de clientes para VEVOR Ventilador Extractor de Aire con Persiana 34 W 1400 RPM, Flujo de Aire de 6,5 m/s, Carcasa de Acero, Ventilador Industrial de Pared con Cable Precableado para Garaje, Taller, Ático y Cobertizo

The fan arrived as scheduled. That's always a plus. Opening the box, simple installation. The value was in the soft start versus high amp turn on. That is a real plus. The rating for CFM proved valuable. We've been monitoring the greenhouse temps with a noticeable reduction in heat within the greenhouse, especially when we hit 100 for ambient temperature outside. The fan is operating well. The install took less than an hour. Know this..... the motor is word but you'll need a power cord or outlet box for finishing the wiring.

Keeps my shop from having moisture on the floor Wish it pulled more air

Been using for about 5 months now and still works great!

Seams to work just fine. Hope it last a long time.

The fan works great and was easy to install. The controller I received was trash. Out of the box it did not work. I opened the box and found a wire broken. I resoldered it. The temperature setting vague. It would run at low temps, but not at high temps. When in use and the MAX fan speed set the fan ran at roughly 3/4 the speed of being directly plugged in. This is annoying because I cannot use the controller to save money by not running the fan at all times. Would NOT recommend the controller.

We have had this fan installed now for 2 months. It moves a reasonable amount of air and build quality is on par with many items costing a lot more. I would give it FIVE stars if it we not for the programmable controller. We have our fan mounted to pull IN fresh air from the outside. Upon trying to program it to cut out on HIGH HUMIDITY i.e. (raining) we realized our controller was just a little buggy and the HIGH & LOW Humidity settings operate in the exact same fashion. Not a deal breaker for our application, but a quality issue none-the-less. Also, when it does start raining and the Humidistat detects our High Humidity set point the controller shuts down the fan control to (0) Zero as programmed, but the fan continues to spin at a very slow speed which does keep the louvers from closing down 100%. Again, not a deal breaker for our application, but an issue that could be problematic for some if it a common one. One more note, at least with our experience, was that you cannot set the controller to shut down on multiple parameters. Example: Shut down on High Humidity AND/OR High Temperature. So maybe it isn't raining, but it is 98 degrees F outside and you don't want to pull that heat into your building, if the controller isn't set to High Temp., it won't shut it down.

I put this fan in the garage at the top of gable wall. It works as it should, but I wish I had bought the bigger fan. It moves the air, just not as much as I had figured. I'll start setting the thermostat and see how that does. Maybe the fan starting earlier on the t stat will keep the garage cooler. I'll give it another summer to get a good judgement, order another fan if necessary.

Good purchase, definitely worth the price. It’s still fairly quiet. A few parts vibrate from time to time. It’s not 100% rainproof though, so you’ll need to install some kind of cover.

I bought this for my attic and it runs but I cannot program the unit to shut off in the Auto Mode. I've tried several time to program it but it will not shut off.

Great producto working well easy to install