Reseñas de clientes para VEVOR Soporte de Rueda de Motocicleta Capacidad de 816,5 kg Calzo de Rueda Diámetro de 381-558,8 mm Ancho de 76,2-203,2 mm Soporte de Transporte de Acero para Remolque Taller Garaje

Muy robusto y bien acabado. Incluye los tornillos de anclaje metálicos para anclar a plataforma de suelo. Muy satisfecho con la compra.

le bloque roue moto est stable et pratique et costaud. les 2 tampons a l'avant glissent sur le sol (test fait sur différents sols) ce qui rend plus compliqué pour sortir la roue du bloque roue! l'objectif en prenant ce modèle de bloque roue était de ne pas faire de trous au sol...

Es adecuado para la moto de 1700cc solo hay que anclarlo y acoplrle unas maderas para en la ramapa para que ingrese la llanta sin tanto esfuerzo

It's a little wide, it does create a tripping hazard.

Overall, the product is solidly constructed but tolerance between the backstop and pivot plate with the base plate is pretty sloppy. Pivot to base at the fixing pin has about 10mm of side slop. Between the backstop and base plate at the 12mm fixing pin is about 8mm. Not the end of the earth but the addition of several washers is a must to ensure the bike is held upright without sideways/rocking movement. I had hoped for a portable bike stand to use in my garage with a couple of bikes but slides on concrete so easily due to the short pivot creating a steep ramp to drive onto the stand so Ill need to add rubber pads under the stand for it to do what I need it to do.

For what it is, it does the job. Quality pretty good for the price.

We hauled two street bikes 500 miles with no issues. I would recommend this to anyone.

Worked great. Thank you Vevor.

I bolted my stand onto my tip trailer using using the threads of the forward foot pegs that come with the stand. Made a 1200 mile round trip on good and poor highways and the stand performed great. I naturally used the stands forward tie down eye bolts for tie downs. I added my own tie down locations to my trailer to the rear and half way down the bike; a 2009 KLR 650. I have a good set up and the new stand performed.

Great chocks! Easy to install with 3/8" threaded inserts and 5/16"-18 bolts. (8-each). Affordable. Drive in with kick-stand up and release. Stays up until tied. 3-straps per bike. Sportster and Bagger both fit. Great quality! Adjustable.