Reseñas de clientes para VEVOR Soporte de Rueda de Motocicleta Capacidad de 816,5 kg Calzo de Rueda Diámetro de 381-558,8 mm Ancho de 76,2-203,2 mm Soporte de Transporte de Acero para Remolque Taller Garaje

For what it is, it does the job. Quality pretty good for the price.

It's a little wide, it does create a tripping hazard.

I bolted my stand onto my tip trailer using using the threads of the forward foot pegs that come with the stand. Made a 1200 mile round trip on good and poor highways and the stand performed great. I naturally used the stands forward tie down eye bolts for tie downs. I added my own tie down locations to my trailer to the rear and half way down the bike; a 2009 KLR 650. I have a good set up and the new stand performed.

Great chocks! Easy to install with 3/8" threaded inserts and 5/16"-18 bolts. (8-each). Affordable. Drive in with kick-stand up and release. Stays up until tied. 3-straps per bike. Sportster and Bagger both fit. Great quality! Adjustable.

Overall, the product is solidly constructed but tolerance between the backstop and pivot plate with the base plate is pretty sloppy. Pivot to base at the fixing pin has about 10mm of side slop. Between the backstop and base plate at the 12mm fixing pin is about 8mm. Not the end of the earth but the addition of several washers is a must to ensure the bike is held upright without sideways/rocking movement. I had hoped for a portable bike stand to use in my garage with a couple of bikes but slides on concrete so easily due to the short pivot creating a steep ramp to drive onto the stand so Ill need to add rubber pads under the stand for it to do what I need it to do.

Parfait ,aussi bien dans le garage que sur la remorque, la moto une fois posée ,tient toute seule , plus qu'à sangler et c'est parti.

The wheel chuck is extremely sturdy and well made but keep moving back when trying to put the motorcycle on it. I remedied the issue by using a ratcheting strap ( wide one if possible) without the ratchet ( just the strap with the hook) and slide iit under the wheel chuck and hook to the "T" part of the chuck. Extend the strap at least 8 feet in straight line to the chuck. When riding the bike on it, the weight of it will keep the chuck in place. FYI use a towel on the vertical portion of the stand as if your tires are wide, it could stick to it (I had to use a 2by4 to pry out my motorcycle the first time.

I love these items and they came so fast. The wheel chock is perfect and exactly what we wanted. So glad we purchased! The motorcycle stand is awesome and actually in a pinch used it on a mower. Easy to use and not too heavy to carry around which I love!!!

zeer stevig, zelfs lomp, maar de Indian blijft rechtop staan!

Great Product