Reseñas de clientes para VEVOR Sierra Eléctrica para Hormigón de 406 mm 5060 W, Sierra Circular de Alta Potencia Profundidad de Corte de 152 mm, Cortador de Disco Húmedo / Seco con Tubería de Agua Hoja para Piedra Ladrillo

Really surprised at the power and ability to cut I was dry cutting concrete blocks and it worked great

Don't know haven't used it yet. Will update when I do. Took it out of the box and put it together. Plugged it in to try but like I said not ready for its use yet. Maybe by the end of the month.

All the stuff I bought from you’ve been very good

I got this tool cutting a lot of concrete. Had it over a year now. Strongly recommend this!

Odlična sajba .brza dostava preporuka prodavača.već sam nekoliko puta kupio kupit cu ih opet prvom prilikom

Prima zaag gaat er door als was het boter erg tevreden mee

Great product . Cuts rock and concrete like butter

Good price/quality ratio. Easy to operate. Built in water hose is quité handy.

works good. I cut about 100'of concert and black top I put in a 30 Amp breaker and used a 12gage cord about 30 ft. The saw and blade did very well and cut in one pass. The key is to give the saw enough power so the motor dose not over heat and give the blade lots of water. I have been very pleased with every thing I have bought from Vevor

The 14" Electric Concrete Saw REALLY works great, lots of torque. The price can't be beat especially when it comes with all the tubing and the water pump! PLUS a 14" Concrete Blade... I'm going to try it out with a metal cutting blade that is also a Diamond Based Blade. I don't think it will have any problems... I really like the design as instead of a direct drive off the motor it goes through a heavy duty 90 Degree gear set before the blade attachment. Much like the gas powered Maniac Saw used for cutting all kinds of material in construction business. It even has a nice set of wheels to draw it through a piece of concrete smoothly... If you want to use it with a base that allows you to adjust the depth it comes with that.. The only concern I have is the blade cover doesn't completely cover the blade when not in use which can be a hazard when setting it down after a cut is made... Most saws of this kind have a spring loaded blade cover that snaps shut as soon as you remove it from the material being cut... Much like a 7 1/4" Powered circular saw... So be careful when setting it down if the blade is still running... Other than that I would still buy it again and I probably will so I have one for CONCRETE cutting and one for STEEL cutting... I wouldn't use a fiber based blade in this saw nor a carbide tipped blade either without the addition of a additional cover for safety reasons. *** BE CAREFUL*** There is a reason I am comparing it with what we like to call a MANIAC SAW... One thing I forgot to add is there is a small bracket that helps hold the handle on 2 of the 4 screws do not have much of anything to grab onto thread wise. The hole that should be threaded goes completely through the handle as if it was made for a longer bolt and a nut. In my case it came loose as I was checking all the bolts to make sure they were tight... I couldn't tighten these 2 bolts as there are no threads in the handle to do so. Since the holes went strait through the handle I just got longer bolts and used locking nuts and this took care of the problem...