Reseñas de clientes para VEVOR Sierra Eléctrica para Hormigón 356 mm 5000 W, Sierra Circular de Alta Potencia Profundidad de Corte de 127 mm, Cortador de Disco en Húmedo / Seco con Tubería de Agua Hoja para Piedra Ladrillo

Bonjour, aucune notice en d autres langues que l anglais et le bouton avec le ressort pour bloquer le disque ne tiens plus en place a peine appuyer une fois dessus Cdt

Saw is a beast IF you ignore NEC and run 40 amps of 115 volts to a 15 amp plug. It will trip 20 amp breakers easily, but with 40 amps on a 8ga cord it’s pretty epic.

They saw works well but trips the breaker constantly.

The saw itself did the job so if you are needing a good concrete saw it will work. The issue is you would need more than a 20 amp circuit to do so. I ended up up using my gas generator and it barely got me through the job, it also kept tripping. So if you have at least a 5500 watt when running generator, you should be fine. Also you will need to by a hose connector it doesn’t come with it. It comes with a water pump though. I used a bucket and it worked.

Keeps flipping every breaker we put it on that has a three prong plug-in. Even our generator with a 30 amp fuse was getting tripped. You will need a plug adapter to even make it work on a generator, or any wall fuse with enough rating to run this… there’s better options out there. Don’t make the mistake.

Like others, no pump! They sell one thing and deliver another. Then, they want me to send the whole thing back (at their great expense) rather than just send me the $20 pump! But I have the hose connector and I will use that. And if I want a pump I will buy one. But this is not a good way to do business so I won’t be ordering anything else from this company. The saw seems to work fine, but needs a 30A breaker. But even with a 20A breaker I finished my small job by taking it easy.

The Vevor DC 425 concrete cutter I received has a serious design flaw (see photo): the tool draws up to 28 amps of current under load, yet it is equipped with a plug rated for only 10 amps. Forcing 28 amps through this circuit immediately trips the circuit breaker or triggers the thermal overload protection on the power strip. Incredibly, the unit is fitted with a 16-amp Residual Current Device (RCD) but paired with a 10-amp power plug. Therefore, I am requesting a full refund.

Can't cut 1/2" without tripping your breaker. Garbage! Has a bend guide that drags on the blade.

Miss leading product. It is advertised as 3200watt but on the side of the machine it says 1800 watt, 27amp, max 4200 watt. I did not expect it to come with a 14 gauge wire with a standard plug. Then I found in their Q&A that your suppose to throttle and make shallow cuts and give it breaks to cool down so you don’t melt the wire. Is that a joke? In Canada the cord/wire needs to be able to handle the max load. This thing isn’t even legal to sell, here. I never ended up using it, but if I did I would have had to buy a 30amp adapter because it kept blowing the breaker. I tried 4 different circuits, including dedicated ones where the saw was the only thing running. I made sure to throttle it and reduced my cut down to 1 inch and still couldn’t make any progress without tripping the beaker. The problem is that 15 amp circuit it rated for 1800 watts max, 1500 continuous, this thing pulls 1800 watts not even under load, before you even start making any cuts. Save yourself the trouble and rent, or if you have a grinder, buy a concrete blade and have someone use a hose to spray waters I drilled a hole in the guard of my grinder to feed the pumps hose that came with the saw, worked like a charm. Cut way faster than this would if you have to make 20 passes just to not blow the breaker or melt the cord. I intend to remove the 14guage wire and put a 10guage with the proper 30amp plug as this should have had.

Absolute waste of money. Heavy piece of crap that trips the breaker constantly and has no cutting power. Avoid.