Reseñas de clientes para VEVOR Sierra Eléctrica para Hormigón 356 mm 5000 W, Sierra Circular de Alta Potencia Profundidad de Corte de 127 mm, Cortador de Disco en Húmedo / Seco con Tubería de Agua Hoja para Piedra Ladrillo

Dopo un paio di mesi che provo questa troncatrice sono veramente soddisfatto. Ho lavorato su vecchi muri in pietra, taglio anche basalto e cemento armato senza alcun problema. L'unico limite che ho avuto è legato alla profondità di tagli. Sicuramente è un ottimo compromesso con i suoi 2000 W di potenza che può essere alimentata da un impianto casalingo

Needed a saw to cut reinforced concrete hobs. Reached out to the VEVOR team and got this unit. Easy to assemble and powerful enough to get the job done.

Worked good and did the job. Tripped the 20A breaker constantly( as the reviews said would happen) but got through it! Let the blade cut no pressure to binder and your good!

It works great and was as good as a gas saw but lighter and no fumes. The water system works great so there wasn't any dust.

Saw works well and cut my 4" slab cleanly. Had to make 2 passes and you can only cut about 2" thick concrete at a time. The saw has a light that comes on when the saw gets overloaded. Not as powerful as a gas powered saw, but much better to use indoors. The price is good, only a little more than a one day rental of a concrete saw. The included water pump works well and provides the water needed for cutting. Don't know the long term life of the saw, but it has paid for itself already. The saw blade life doesn't look to be too long and a replacement blade is pricey.

Worked great for my small block project. Will be great for future indoor use. For the price you can't go wrong.

Works very well just need a direct power source or you will trip breakers a lot. Cuts nice and straight and you can set the depth.

Does the job nicely. But handle like it wants to bite you,so to speak. Get one for ground cutting. Not walls.

This machine is surprisingly good. It cuts well. But there is something very strange about it: the blade rotates 'backwards', IE it spins opposite to any grinder I have EVER experienced. As a result, it always has to potential to kick-back towards you, and makes it EXTREMELY dangerous and hard to use if you are doing wall cuts. Luckily, I managed to dismantle the motor from the gearbox, and rotate it 180 degrees, so it now spins in the normal, safe direction. I also moved one of the water jets to the other side of the guard, and rigged it up to attach to a garden hose and inline tap.

For the money the saw appears to be worth it. The rubber dust flap is a nice idea but was already partially torn and cracked away from one of the two screws that attaches it. That is no good. After 10 minutes of use the remaining side cracked. The motor may draw more current than stated beauty my 20 amp circuit breaker kept flipping. The breaker may be old but was unable to replace because of timing and need to use saw. If saw does draw more than it's a big issue. Not sure where I would be able to use the saw if continually flips 20 amp circuit breakers. Also hard to use because of the safety thumb switch. My Partner saw doesn't have one and makes it much easier and safer to use. Would have attached photo of torn dust flap but site limitations is 2mb and picture is 2.95.