Reseñas de clientes para VEVOR Plataforma Elevadora para Motocicletas 41,5 x 35 cm Elevador de Motos Hidráulicos de Tijera Capacidad de 158 kg Mesa Elevadora con 2 Ruedas Elevación de 340-905 mm para Taller Garaje, Naranja

Pump away but it doesn’t lift, foot pump is a poor design

The motorcycle lift table arrived in a pretty beat up box that seemed to be rolled down a hill before dropped at my parcel box. It was certainly a heavy item that requires a sturdy box/packaging. Unfortunately one of the swivel wheels was badly so that it would not roll at all. There were also a few nuts/screws just floating around in the packaging. I have reached out to support to hopefully replace the badly bent wheel with hopes that I can still use the product. The product seems like it could be great---we shall see. I actually received the motorcycle jack stand as well for a heavier bike and it arrived in a similar way, but with a partially shattered plastic wheel. 2 for 2 broken items was not my hopes for the day.

The price is right for a stand like this and it works well and has good features for the price. The biggest problem comes with the hydraulic jack installed on the lift. The jack lowering knob turns difficult and needs to be quite tight to seal correctly. The next problem is when going to jack it up it leaks internally and lowers almost as fast as it elevates. I noticed if I release the foot actuated lift lever quickly it seems to not leak down as if it has an internal check valve that is sticking sometimes. Overall I like the lift and am going to use the heck out of it. It just would be nice if the jack part had a little more quality control and wasn’t so finicky.

received the motorcycle jack stand and noticed immediately that there were fragments of plastic in the packaging. After looking though things and putting it together (very simple) I found that one of the plastic wheels was partially shattered. Sort of shocked that they would use such a cheap wheel for something rated to 1500lbs. I have reached out to support to hopefully receive a new wheel.

Good kit for the price. Came ready assembled - but badly! Everytime I wheel it across the floor it leaves a trail of nuts and bolts.

For the most part it seems okay, but the hydraulic pump cylinder doesn't work as it should. It's as if it has to re-prime every time you use it. You keep pumping and it just doesn't go anywhere. Also, the design of the lever for the pump is really screwy, it hits the wheel every time you pump it, and it hit's the ground before you really get the full stroke in.

Well it looked like it was too good to be true. And I will say overall it will function as intended for the most part unfortunately I can't strap the straps down because the strap ring was cracked at the weld. There's a lot of crooked Welds as well. Overall though I suppose it'll function. Several days ago I went to the company's website to tell this information to them and upload pictures. They sent me two messages and neither one of them were actually responding they just said hold on we're looking into it. And then when you try to upload pictures on this review it says you can only do two megabyte pictures which don't even exist anymore. But I'm going to try to scale them down and you should see them in this review.

What I liked was the promptness of delivery, the communication level of contact throughout the process. Packaging was also good. What I don’t like is the poor build quality and lack of attention to detail. When the article arrived, was unpacked and assembled, there were parts missing. No means of securing the release shaft to its screw. Then the foot pump either didn’t raise the platform or barely worked at all. The pump was losing pressure and wouldn’t raise the platform with normal operation.. Rather than return it to the mainland from Tasmania, I took a look at what might be causing the problem. Here is what I found.. The screw on the release valve seemed to work ok but the foot pump shaft itself seemed very loose in its mount. The problem was in the thread fitting guide nut which screwed into the base plate and through which the plunger passed was loose and had been jammed very tight, probably to compensate for the poor fitment at assembly time. Thread tape and reassembled and now it is working ok. But not great. This reflects poorly on the product and the company and proper quality control would have caught it early before becoming the customers problem. A customer should not have to carry the burden of poor workmanship upon receipt of the goods at any time. I’m scarred by this purchase and advise those considering a purchase of this model to be very suspicious of these things I mentioned above. I eventually got the jack I paid for but not without fixing its problems first.

Not that steady as it looks and very heavy considering its size

the hydraulic jack is leaking oil right out of the box ,i did open a case with vevor and will see how its handled ,if they handle it well i will redo this review , if not dont buy this