Reseñas de clientes para VEVOR Plataforma Elevadora para Motocicletas 41,5 x 35 cm Elevador de Motos Hidráulicos de Tijera Capacidad de 158 kg Mesa Elevadora con 2 Ruedas Elevación de 340-905 mm para Taller Garaje, Naranja

Gebruikt voor motor bij verwijderen voorvork, netjes recht geplaatst onder motor. Maar bij gewenste hoogte kon ik de stang niet aanbrengen. Hef was schreef getrokken

This thing doesn't fit under my 12" height 2027 Suzuki DR-Z4s. The marketing is very deceptive. They show and say it will life a motorcycle? How? The lowest this thing goes is 14". How many motorcycle have 14" of clearance under them? What a waste of $ and it's a pain in the butt to put together. I do not recommend. Deceptive advertising at best.

Prodotto arrivato difettoso, una puleggia era rotto

Qualité très médiocre, matériel assez faible, tout bouge dans tous les sens même en ayant serré tous les boulons, le cric est instable et la pédale ainsi que la molette pour le faire descendre sont mal mis et pas pratiques du tout. Je ne pense pas qu'il va durer dans le temps

I've used this Item for about 10 times and has failed, this item is useless and I do not recommend to anyone.

Jack is broke.

Erster Eindruck: Rahmen krumm, Gewinde nicht ordentlich geschnitten .... absoluter Chinaschrott.

Pump away but it doesn’t lift, foot pump is a poor design

The motorcycle lift table arrived in a pretty beat up box that seemed to be rolled down a hill before dropped at my parcel box. It was certainly a heavy item that requires a sturdy box/packaging. Unfortunately one of the swivel wheels was badly so that it would not roll at all. There were also a few nuts/screws just floating around in the packaging. I have reached out to support to hopefully replace the badly bent wheel with hopes that I can still use the product. The product seems like it could be great---we shall see. I actually received the motorcycle jack stand as well for a heavier bike and it arrived in a similar way, but with a partially shattered plastic wheel. 2 for 2 broken items was not my hopes for the day.

The price is right for a stand like this and it works well and has good features for the price. The biggest problem comes with the hydraulic jack installed on the lift. The jack lowering knob turns difficult and needs to be quite tight to seal correctly. The next problem is when going to jack it up it leaks internally and lowers almost as fast as it elevates. I noticed if I release the foot actuated lift lever quickly it seems to not leak down as if it has an internal check valve that is sticking sometimes. Overall I like the lift and am going to use the heck out of it. It just would be nice if the jack part had a little more quality control and wasn’t so finicky.