Reseñas de clientes para VEVOR Placa de Fijación para Minicargadora 9,53 mm de Grosor con Receptor de Enganche de 58 mm, Placas de Carga de Acoplamiento Rápido Compatible con Minicargadoras Deere, Kubota, Bobcat y Mahindra
3/8 pulgada
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
48 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Mr
3/8 pulgada
Easy assembly and we'll made. Pictured as a painted or power coated piece but comes to you as raw steel. You'll need to finish it
0 personas encontraron esto útil
Traducir reseña a Español
Mr
3/8 pulgada
Well made and sturdy. Nice welds. But the item is shipped without any paint or coating which is very annoying. An attachment that is used outside needs protection so it’s up to the customer to paint it.
0 personas encontraron esto útil
Traducir reseña a Español
Flimsy
3/8 pulgada
Flimsy
0 personas encontraron esto útil
Traducir reseña a Español
Estimator
3/8 pulgada
The picture of the attachment plate is upside down which is irrelevant. The problem I had was that the attachment plate bent out in the area where the hitch receiver is. I would suggest making the plate solid all the way across instead of having that piece cut out and possibly add some reinforcement in that area. I had to weld a piece of 6" channel across the plate where the cut out is.
1 personas encontraron esto útil
Traducir reseña a Español
P. E.
3/8 pulgada
This thing should not be used for anything over 700#'s. Tried to move a trailer with a max 2,000# tongue load and the thing bent. Not sure I can even get it off my skid loader now I was worried about the bolts being a low grade 4.8. that was the least of my worries since they held up. The picture is after lifting the trailer and where it sprung back to. Do not buy for heavy trailers, works for light stuff
5 personas encontraron esto útil
Traducir reseña a Español
Mr
3/8 pulgada
This product was used to move a travel trailer 500 pound tongue weight and the framing of the attachment Ben
1 personas encontraron esto útil
Traducir reseña a Español
Owner
3/8 pulgada
It indicates it is for use up to 7,000 lbs. That is far from accurate. The first time it was installed with my Kubota SVL 75-3 in order to move a 21' camper, the mount plate bent. We lifted up the camper and watched it slowly sink back to the ground as the plate buckled. There is know way we even came close to attempting to lift anything near the rated capacity. It is scrap metal at this point after just one attempted use.
0 personas encontraron esto útil
Traducir reseña a Español
Never order from here!
3/8 pulgada
Received the plate, missing bolts and the receiver. The plate is essentially useless without the parts. Have went in circles via email for weeks with no resolution. They just keep saying my problem was sent to the appropriate office without ever solving anything.
0 personas encontraron esto útil
Traducir reseña a Español