Seleccione el país/región, el idioma y la moneda que prefiera para comprar.
VEVOR Pistola Pulverizadora Neumática de Pintura Texturizada, Tolva 4,5 L, 3 Boquillas 3,5 mm, 6 mm y 8 mm, con Aire Comprimido para Texturas de Palomitas de Maíz, Derribo y Cáscara de Naranja

Reseñas de clientes para VEVOR Pistola Pulverizadora Neumática de Pintura Texturizada, Tolva 4,5 L, 3 Boquillas 3,5 mm, 6 mm y 8 mm, con Aire Comprimido para Texturas de Palomitas de Maíz, Derribo y Cáscara de Naranja

4+6+8 Textura Simple

Opiniones de los Clientes

Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
8 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
FILTRADO POR
Reseñas del Artículo Actual Filtros claros
8 reseñas
Traducir todas las reseñas a Español
Traducido
Ver original
aRUNDA aRUNDA
a GREAT TOOL!
4+6+8 Textura Simple
gREAT TOOL!
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
okiejennsmith okiejennsmith
good gun
4+6+8 Textura Simple
sprays great and hopper holds more than expected. only flaw is the hopper doesn't tighten on the gun. slips off very easy even when the clamp is tight.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
joesfam1st joesfam1st
Great item
4+6+8 Textura Simple
Awesome tool should have bought way sooner
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Moles Eric Moles Eric
Artisan
4+6+8 Textura Simple
Bon produit
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Francés
Ver original
Kevin P. Kevin P.
Easy setup
4+6+8 Textura Simple
For the price it was worth every penny and fast shipping
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Oval Gil Oval Gil
Textura
4+6+8 Textura Simple
Es lo que esperaba 😉 lo recomiendo para trabajos tanto para el hogar como para cualquier trabajo de textura . Muy buena opción
0 personas encontraron esto útil
Handy for texture wall-repairs Handy for texture wall-repairs
I watched the pros used it to repair my walls
4+6+8 Textura Simple
I bought this texture spray gun for future repairs. I watched the pros used this spray gun to fix my walls when I had a repiping specialist company did the whole-house PEX repiping back in 2015. The results were amazing that the texture coating matched perfectly with that of original wall pattern. I couldn't tell the walls had been cut open after a new coat of paint. I haven't used my new spray gun yet, but with the 4 nozzles that came with the tool I am confident that I will get the same results as the pros.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
LimeWashSprayer LimeWashSprayer
Utilitarian and simple
4+6+8 Textura Simple
Utilitarian and simple 4
I've used this spray gun with hydrated lime to spray old European stone/concrete cellars with high moisture. It did the job. The gun itself is very rudimentary, as it's basically just a feeder for the material in the hopper with a trigger. The hopper is held in place by a hose clamp and the mating surface on the gun has an O-ring, but that doesn't make the best seal, so runny materials can still seep through and end up on the side of the gun. The connector/adapter the gun comes with is meant to be hooked up directly to a naked hose, meaning it doesn't have a European quick connect. I took one from a different gun. The connector itself is glued in the gun and can't be unscrewed, so an adapter has to be screwed on the existing connection. The air once hooked up is always spraying, meaning the trigger doesn't control or adjust the amount of air at all - you need a regulator or an inline valve to control the air. I just uncoupled the gun every time the hopper ran empty since I had neither. Given that the material I was spraying (lime) wasn't very runny, it handled it extremely well - I used the widest nozzle (8mm), but could've gone with a tighter one to reduce consumption.
3 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original

Quien compró este articulo también compró