Reseñas de clientes para VEVOR Abrazadera de Horquillas de Tractor Longitud de 109 cm Abrazadera en Horquillas de Paletas Carga de 907 kg Cargador Frontal de Accesorios para Tractor Cargador de Cuchara para Agricultura Granja

I needed forks for my John Deere utility tractor, so I bought these. Shipping was fast, and they arrived undamaged. They slip on over the cutting edge on most buckets. My tractor cannot lift no where near the 2,000 lbs these are rated at. For pallets, they work pretty good. Since they are a bit thicker than a regular fork, it is a little bit of a challenge to work them into a pallet. Since nothing keeps them moving back and forth, you might need to reposition them. They will lift a pallet and do a pretty good job of it. As far as lifting items that are not a pallet, it can get pretty interesting. I was moving some jet skis that where sitting on old tires. Since the hull is not flat, it took a couple of tries to find a spot where forks would not spread as drove around. If the object has a flat bottom, you shouldn't have this problem. Since the weight is cantilevered so far out of front of the tractor, you will likely be able to lift less than your rated capacity. Would I recommend these, yes but understand there limitations and they are not really meant for everyday use. If you just need to unload a truck once awhile or move a pallet around they should work for you. I would definitely look into a stabilizer bar, ideally an adjustable one you can move forks closer together for those small pallets.

Le produit va trés bien. La seul chose que j'aime plus ou moins, c'est la vis pour tenir les fourches, ça demande une bonne force humain pour bien la serré, Un boulon serait peut-être mieux pour la visser avec une visseuse a percusion ou un ratchet. Et le bout de la vis s'endommage donc on ne peux plus la dévisser complètement.

Just what I ordered! My only problem is that I can't pick up much weight with them on my kubota tractor as it puts weight too far forward. I've added some weight to the rear which helped but I need to figure out how to safely add more and what the limits are. They're great for picking up brush & branches, and I've used to pick up a small rider mower to work on it.

I bought the forks without the spreader because of price. They are unstable without a spreader and chains. I made my own spreader. I’m happy with the purchase. They suit my need of moving logs and firewood. I suggest viewing some YouTube tutorials before buying.

I updated somethings on forks to work better, i added a 1/4" slat stock to bottom end, an d reinforced the front where bucket touches

Work well. The only issue is twisting. I should have got the set with the support bar in the center.

If you need forks and don't want to spend a ton these are great

Work well worth the price

For the price it works well. Used it for moving pallets, lifting big stone steps.

These forks work great. Would only add locking nut on the bolts.