Reseñas de clientes para VEVOR Abrazadera de Horquillas de Tractor Longitud de 109 cm Abrazadera en Horquillas de Paletas Carga de 907 kg Cargador Frontal de Accesorios para Tractor Cargador de Cuchara para Agricultura Granja

I got this to move light stuff like brush and firewood. If you have a tractor with a loader, you need a set of forks!

Fit well to tractor bucket. Only issue was one of the clamping nuts was loose on the clamp bolt. Work well otherwise.

As an Engineer I am critical of things, but here is a honest review of this product. It works and functions, I would not try to lift 2000 lbs with this, the material is simply not there, nor is the footprint on the tractor bucket to support such a load. Most tractor buckets are simply not designed to handle that load within the small space that the forks are in contact with the bucket itself. I would image it would damage or at least bend the bucket. Don't get it wrong for moving around stuff that is light weight but more than 2 people can handle this is a easy product to utilize. For Design purposes, the threaded attachment needs to be fine thread instead of coarse thread and it would help to have a better base on the securing "washer/nut"(it tends to walk around while either tightening it or losing it) A lock nut would also be a great idea to incorporate as well.

Forks are built good for the rated weight they can handle. Easy to put onto bucket. The hold down bolt is weak and bends easily and one of the bottom nuts fell off on mine while loosing the bolt from the bucket, the lock tight used to keep it on broke loose allowing the nut to unscrew from the bolt. I drilled a hole through the nut and bolt and installed a roll pin to fix it. Works great now

Everything is good I just wish the screws to hold them in place had something where you can use a wrench to get it tight other than that great product.

Well made - I use it on my mini stand on skid steer loader to move cut brush to my burn pile - My only complaint is the screw down locking bolt end does not swivel so it is hard to get it tight - I resolved the problem by making my own swivel foot - The price is fantastic and I would not hesitate to recommend it

Good but the clasps that hold need to be better,they loosen up and if over tighten break.need to be grade 8

How about these and they work really well hook right onto the bucket of my tractor and helped a lot. The only thing I would change is I probably would’ve bought the 60 inch instead of 43.inch

We'll built with good welds, I did have to replace the hardware/bolts for tightening them to the bucket, they bent the first time I used them , other than that they work great for moving pallets or round bales

Worked great right out of the box. saved the day a couple of times Already!! a good purchase for my needs