Reseñas de clientes para VEVOR Abrazadera de Horquillas de Tractor 149 cm Abrazadera en Horquillas de Paletas Carga de 907 kg Barra Estabilizadora Ajustable Horquilla de Paletas para Carretilla Elevadora con Pala Cargadora

I purchased this pallet Fork Lift and the middle rod has bent, why I don't know. I use it to lift limbs and it supposed to support up to 2000lbs but the middle bar bent. However you decide to handle this is fine with me. Sorry I could only download 2mb of the pic part of the picture

I found it to be a great product that is very useful. Must be careful using, it is limited in what it can do. The price is great for what it can do.

The forks are strong and fit over the lip of the tractor bucker well - their is a minor manufacturing flaw and a design flaw: One of the tightening bolts threaded connector to the fork is welded incorrectly causing the side of the bolt to rub against the side of the fork bolt chase see image). The fork screw -down clamp bolts look like they are supposed to have flat contact surface that 'should' allow the bolt to tighten without causing the round contact surface to 'walk' on the bucket. This is a problem and a better contact point could easily be designed that would not walk on the bucket surface (a design that would allow the bolt to tighten without the contact surface turning with it). However, with that said, I greased the bolt into the nut/contact surface and left the bolt about 3/8 inch; from the contact plate which allows for the contact surface to better seat while tightening down the bolt - the contact surface still walks on the bucket, but not as much.

had graag een tussen of stabilisatie stang gehad of als nog besteld is dat mogelijk ?

Muito bom artigo relação preço

They good for the price. Hard to keep tight. But I can't beat them for the price. They do what I needed them to do.

They are heavy duty for sure. Almost too heavy for my little tractor. The L bolts to tighten on the bucket are a pain. No matter how tight I turned them, they still managed to move. For the price they are a good deal, but I need a better way to attach them.

This 4,000 lb clamp-on pallet fork set from Vevor is a seriously heavy-duty addition to a tractor bucket, with one major caveat. The forks themselves are incredibly solid and built to handle heavy loads, but the stock securing hardware is frustrating. ​The L-bolts that come with the kit to secure the forks to the bucket just do not cut it. No matter how much hand strength you use, you can never get them tight enough to prevent the forks from shifting under a real load. ​To fix this, I completely ditched the stock L-bolts and ordered M20 × 2.5 × 140mm bolts from Grainger. The thread match is perfect. Now, I can just use my impact gun to crank them down securely. With that quick hardware upgrade, these forks hold perfectly tight, do not slip, and work exactly as they should. ​If you are willing to spend a few extra bucks on proper bolts to replace the stock L-bolts, this 4,000 lb set is an excellent value and a highly capable attachment for heavy lifting.

Good quality, excellent price. If i could change anything, i would make the levers that clamp it on with bolt heads, Sometimes whatever you are hauling can hit those levers and loosen the clamps which allows the forks to move.

Buon prodotto,montaggio semplice