Reseñas de clientes para VEVOR Abrazadera de Horquillas de Tractor Longitud de 149 cm Abrazadera en Horquillas de Paletas Carga de 907 kg Cargador Frontal de Accesorios para Tractor Cargador de Cuchara para Agricultura Granja

Well made - I use it on my mini stand on skid steer loader to move cut brush to my burn pile - My only complaint is the screw down locking bolt end does not swivel so it is hard to get it tight - I resolved the problem by making my own swivel foot - The price is fantastic and I would not hesitate to recommend it

These forks work great, were easy to install and did the job well. Good Deal at a Great Price. I use thgem 4 to 5 time qa week to move pallets and equipment around and into storage for winter.

Good but the clasps that hold need to be better,they loosen up and if over tighten break.need to be grade 8

Lifted my load great. Cross member broke, allowing the forks to move. Screw down bolts need to be separated more, so they don't hit each other or change to a large bolt head.

I always get things shipped quickly from Vevor. The quality of these clamp on forks is extremely good, thick metal and good welds. The only thing I would recommend is to spend a bit more and get the 60”. These seem just a bit short.

Read description carefully forks do not have a 60 working length seem to be holding up ok didn't fit my bucket verry New bucket cutting edge. Is to thin for the front of the forks to clamp on tight

Does the light lifting to off load deliveries that I needed. Can't ask for more. Easy to attach and connecting arm keep forks aligned

Good to work aroud the house, but falls of easily when you try to get out of an heavy pallet. Overall satisfied

How about these and they work really well hook right onto the bucket of my tractor and helped a lot. The only thing I would change is I probably would’ve bought the 60 inch instead of 43.inch

These forks worked great, lifted very heavy logs with no problem. But the Stabilizer Bar cracked the first day. The welds between the bar and the ends (that slide on the fork) werent strong enough. I'm searching for a heavy duty bar now. But the forks are very heavy duty, impressive for the price. I do recommend using a rubber blow hammer to get the screw bolts really tight, and keep it with you b/c they do get loose and/or you will need to bang the fork straight periodically. But for occasional use, they are great