Reseñas de clientes para VEVOR Abrazadera de Horquillas de Tractor Longitud de 149 cm Abrazadera en Horquillas de Paletas Carga de 907 kg Cargador Frontal de Accesorios para Tractor Cargador de Cuchara para Agricultura Granja

They’re ok for light duty work. It’s all a bit wobbly even with the cross brace but again it’s for light duty work. All in all I’m pretty happy with it. The price is good.

Die Palettengabel ist im Großen und Ganzen in Ordnung, vor allem für den Preis. Die Aufnahme für die Schlepper Unterlenker sind allerdings nicht optimal. Ich muss sie für meinen Schlepper noch anpassen. Anstatt 2 Bleche, zwischen denen eine Kugel mit Bolzen befestigt wird, ist nur ein Blech angeschweißt. Mit den mitgelieferten sehr langen Bolzen lässt sich der Rahmen nicht am Schlepper anbringen. Der Bolzen für die Oberlenkerkugel ist sehr lang, es funktioniert aber. Die Schweißnähte an sich sind in Ordnung. Wenn die Gabeln angebaut sind, haben sie leichten Höhenunterschied an der Spitze, ist aber noch im Rahmen. Für die Unterlenkeraufnahmen habe ich mir gesondert woanders schraubbare Unterlenkeraufnahmen bestellt und angebaut, siehe Bilder. Nun Funktioniert es. Alle Bolzeny die mitgeliefert wurde, waren viel zu lang. Diese habe ich gekürzt.

I purchased this pallet Fork Lift and the middle rod has bent, why I don't know. I use it to lift limbs and it supposed to support up to 2000lbs but the middle bar bent. However you decide to handle this is fine with me. Sorry I could only download 2mb of the pic part of the picture

The girls themselves are holding up okay, but the stabilizing bar has already bent and torn. I would also appreciate longer handles to screw this thing into my bucket. Price was decent for what I got. I may as well have opted for the less expensive version without the stabilizer.

I found it to be a great product that is very useful. Must be careful using, it is limited in what it can do. The price is great for what it can do.

The forks are strong and fit over the lip of the tractor bucker well - their is a minor manufacturing flaw and a design flaw: One of the tightening bolts threaded connector to the fork is welded incorrectly causing the side of the bolt to rub against the side of the fork bolt chase see image). The fork screw -down clamp bolts look like they are supposed to have flat contact surface that 'should' allow the bolt to tighten without causing the round contact surface to 'walk' on the bucket. This is a problem and a better contact point could easily be designed that would not walk on the bucket surface (a design that would allow the bolt to tighten without the contact surface turning with it). However, with that said, I greased the bolt into the nut/contact surface and left the bolt about 3/8 inch; from the contact plate which allows for the contact surface to better seat while tightening down the bolt - the contact surface still walks on the bucket, but not as much.

These are ok for light loads. Max 350 lb

had graag een tussen of stabilisatie stang gehad of als nog besteld is dat mogelijk ?

Needed something at the house for odd jobs and these were perfect. Use them on my Kubota tractor. No issues!

They good for the price. Hard to keep tight. But I can't beat them for the price. They do what I needed them to do.