Reseñas de clientes para VEVOR Molinete de Ancla Eléctrico de 12 V CC, 600 W, para Cadenas de 6,35 mm y Cuerdas de Nailon de 14 a 16 mm, Carga de Tracción de 260 kg, para Embarcaciones de 7 a 9 m, 233 x 206 x 140 mm

Je suis content de mon achat, ce Guindeau et robuste le montage se fait facilement avec un petit peu de connaissance et en suivant bien les plans, pas de soucis. La livraison s’est très bien passée. Elle a été très rapide comme toujours avecV et vevors . Le gros avantage c’est qu’on peut mettre aussi bien une chaîne que du cordage la chaîne de 6 mm. Calibré passe très bien et le cordage en 14 est parfait. Bien sûr prévoir faire une épissure entre les deux. Je recommande le vendeur et le produit.

Installation went as expected all the electrical parts worked as they’re supposed to. The issue I had with the unit is the unit states 9/16 or 5/8 rope and that is incorrect. Once you tie back the rope with the chain the gypsy can no longer pull the Anchor in it just slips as the rope comes in as soon as it hits the gypsy or the chain wheel, whatever you wanna call it it it starts slipping. It requires a half inch line only. Once I purchased a half inch line it worked properly, but it must be an anchor winch line not a standard anchor rope. And another problem was finding the 6 mm chain. That was a little difficult. Outside of that the unit works as expected.

Windlass was advertised with freefall that would work from the switch, but after getting it, you can only do free fall by manually loosening gypsy. Also after anchor is set the windlass is not strong enough to hold it when off and slowly keeps feeding out if you don't go up and tie it off. It sort of defeats the purpose of a remote windlass. Looks pretty but not geared low enough to hold 26' boat.

I can't find chain that fits this so I want to return it