Reseñas de clientes para Microscopio multidireccional VEVOR con soporte de resorte, microscopio de joyería con aumento de 7X-45X, soporte para incrustaciones de microjoyas con luz LED de anillo USB integrada, microscopio de joyero para incrustaciones de joyas

This is a huge upgrade from an optivisor for stone setting. I haven’t used a more expensive microscope so I have nothing to compare it to. The articulating arm is pretty stiff and I have to give it a really good yank to get it into position and the cable on the ring light is a little on the shorter side so I might need to extend it or get a different one. My biggest complaint is that the rubber eye guards don’t attach securely at all. I am literally knocking them off onto the floor 29 times a day or if I put the cover on and take off they will disappear so I am planning on buying some new eye guards for it. The ball vice is fine. It works for holding rings but it’s not as heavy duty as a GRS. I really waffled on buying a Leica, then an Amscope trinocular. But after receiving the Amscope , I realized that the Vevor was about a third of the price and same unit/optics minus the trinocular part. If you need to set stones and not go into debt then this is a great option and I whole heartedly recommend despite the couple of drawbacks mentioned. I own a lot of Vevor stuff (melting furnace, rotary tumbler, fume extractor) in my studio in addition to name brand stuff and Vevor hasn’t let me down yet.

Overall this scope is a great value. It is definitely not as good as the more expensive rigs, but it gets probably 80% of the way there for a fraction of the cost. Here are some problems you should know about before purchase. None of them are dealbreakers, and can be pretty easily overcame. - the big one is the lead screw for mounting the microscope to the arm was not long enough on my unit. Only about 2 threads were able to grab and so I almost dropped the microscope a couple times when I went to tighten it into place and the threads slipped. I solved it by taking a 1/2 inch drill bit and drilling out a small recess for the handle to sit into so it’d have more purchase on the screw. Now it can’t get quite as tight so the head will still swivel from side to side without much force, but at least it won’t fall off the arm. - the included usb ring light has a couple issues. First the cable isn’t long enough to be ran all the way down the arm and to a power source, so you’ll need an extension cord. Second it doesn’t come with an ac adapter, so depending on your power situation you’ll have to pick one of those up too. Third the light isn’t diffused at all so it can cause some pretty nasty glare on your workpiece. Some tissue paper can be affixed to help. - The included dust cover won’t fit over both the arm and the microscope after it’s been assembled. Overall though the build quality is pretty good, with all the important parts being quality metal. The picture quality is good, and the range of zoom is good for all the work I do. The ball vise is a little cheap, but it get the job done and has a good variety of bits to let it grab whatever you need. In whole, this setup is totally worth the price, even after picking up a couple little things to make it run better.

…hatte letztlich keine Verwendung dafür und wollte es zurückschicken. Damit fingen die Probleme an. Zu den Fakten: Zum Artikel gab es keine korrekte Rechnung, keine Steuernummer, keine Firmen- oder Rücksendeadresse. Letztlich wurden mir 2/3 des Kaufpreises erstattet, immerhin. Eine auf der Vevor-Webseite Option, eine Bewertung abzugeben, funktioniert nicht, wie zu erwarten. Fairerweise muss ich erwähnen, es gibt einen Kundenservice, der auch antwortet. Fazit: das Geschäftsgebaren ist als unseriös zu bezeichnen, auch wenn der Artikel in Ordnung war.