Reseñas de clientes para VEVOR Mesa de Soldadura de 91,4 x 45,7 cm Banco de Trabajo de Soldadura Carga de 544 kg de Acero sobre Ruedas con Freno, 2 Niveles 4 Ranuras de herramientas, Orificios para Fijaciones de 1,6 cm

GLS did the shipping, but it was damaged by them, the don't really care about something!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I decided to add metal working to my home shop. Purchased this cart based on the reviews and price. Bang for buck it is great. The castors are pretty nice with option to lock all four in place. It's a light duty (10 gauge top) portable work table. If that's what you are looking for then you will be very happy with it.

The table is heavier and sturdier than I thought and should be ok for the occasional welding I do. The only problem is the packaging is not sufficient to prevent damage during shipment. The table arrived with one of the casters broken and the bottom shelf dented where the caster was located in the box. I called customer service, and they sent me a new caster within a few days. The dent was minor, so I let it pass.

Strong steel construction. I added washers under the bolt heads, although it is probably fine without them. The holes in the table are slightly undersize (0.622"), probably because they were punched (not drilled) with the 3 mm steel plate hot. I had to turn down the shanks slightly on my clamps to fit in. (That is not a big deal, but I am not about to try to drill out all of the table holes.) The lower shelf is really useful and the casters roll nicely.

Respektabelt svetsbord för ett vanligt garage till ett oslagbart pris. Nästa steg är ju proffsbord för 10k. Jag använder mitt mycket mer än jag trodde. Jag satt jordade anslutningar på sidan och det där platta mitten segmentet var för flimsigt för mitt tycke så satt en metall-hylla där.

Es demasiado alta, endeble y se bambolea. Las mesas que me hago yo para mí, son de 5mm. Está es de 2.5 mm. El sobre de la mesa le sobran agujeros y es muy delgado.

Der Preis ist top. Der mobile Schweisstisch ist zusammengeschraubt sehr stabil (bitte in eigene qualitativ hochwertigere Schrauben investieren). Ein Manko !!! Sämtliche Löcher in der Platte sind nicht 16 mm, sondern 15,7 mm im Durchmesser. Wir müssen nachbohren.

Ho preso il 30x20 Quanto a solidità ,ok però nel montarlo mi sono accorto che mancavano 3 bulloni .non mi sono sentito di mandarlo indietro x così poco. Per il montaggio beh armatevi di pazienza perché ci vuole un po' di tempo. Solidità e stabilità credo che ne abbia.

This janky POS cannot hold 1200 lbs. we put a 600 pound unit on it and the legs buckled at the bottom by the castors. Very light weight