Reseñas de clientes para VEVOR Máquina Pelacables Automática de Hierro Fundido 750 W Pelacables Eléctrico Motorizado de 1,5-40 mm Pelacables de 30 m/min con Manivela Manual Extra 10 Canales para Reciclaje de Chatarra de Cobre

Never worked from the beginning and can not het any resolve or refund yet will update...

plastic adjusting knob on top broke first time I used it. very cheap. used 2 nuts and James them together. now and use a socket and ratchet to adjust.

I mostly tried 1.5 mm cables. The smallest socket needs to be at the lowest position so that the cable doesn't slip. But then it's really time consuming to place the cable between the rollers. Also the blade doesn't seem to be exactly in the middle. I'm super disappointed and don't understand why the device has a high score.

This thing is junk. It doesn’t work as advertised

Le moteur ne fonctionne pas et le service méditer remboursé

Very surprised and disappointed at lack of quality check of unit before packing and shipping. Unit came partially assembled, Black plastic handle was already attached to metal handle arm which should attach to main body. Main body comes with a black metal D-shaft section (drive flat section) so as to attach the handle arm securely. The handle arm does not come with a corresponding D shaped hole in the arm,this would have improved its build quality. When trying to attach the handle arm to the shaft, it was noticed that the threaded pilot hole for the M8*12 hexagon screw (item 6 page 5) was not in the correct position on the arm. The M8 threaded hole appears to have been incorrectly installed at the wrong end of the handle arm next to the black plastic cylindrical handle. This has made the unit inoperable unless, we drill and tap the handle arm ourselves or replace the handle arm with an arm incorporating a D-shaft slot and M8 threaded locking screw hole. When you purchase a piece of equipment, we would normally expect to be able to use it fairly quickly once bolted and screwed together. In this situation, unit is unusable until handle issues are resolved.

0.05” wire (16 ga) wire it claims to do,.. witch is why I choose this single wheel model. And let me tell you personally it does not work

Je vous envoie des photos du colis a sa réception et l’état du plexiglas L’appareille fonctionne au pire je remplacerai le plexiglass, je tien à rappeler qu’il y a eu déjà certains échanges entre nous concernant les délai de livraison qui m’on paru infinissable.. et là en plus déception à la réception du produit, le livreur qui me le dépose à l’envers en plus. Personnellement je pense que se genre de produit, vu le poid devrais être emballé dans une boîte en bois et non en carton avec du polystyrène.. j’attend de vous, j’espère un dédommagement à la hauteur de ma déception… Cordialement.

Die Abisoliermaschine ist ein Arbeitstier, sie tut genau straight das was sie soll. Aber kann ja nicht alles schön sein. Unterhalb vom Ein/Aus Schalter sind die Kabel ohne Zugentlastung und Durchführung einfach so durch die Öffnung geschoben. Das FLEXIBLE Kabel, ist ohne aderendhülsen in die schraubkontakte eingeführt worden. Zugentlastung + Flexkabel ohne aderendhülsen = Kabel raus, nachbarkontakt berührt, und funken fliegen aus dem Schalter.

works ok