Reseñas de clientes para VEVOR Regruesadora 330 mm Cepilladora de Madera 2000 W Máquinas de Cepilladora de Prensa Ancho de Cepillado Cepillo Eléctrico para Madera Profundidad 3 mm con Soporte de Hierro Mango Guardapolvo

Ottima macchina

J'ai acheter cette raboteuse pour raboter du bois de palette. J'a utiliser la machine pendant environ 4 heures de suite tout c'est bien passé les résultat est franchement très bon. Les caractéristique sont très bonne avec une surface de travail de 33 cm de large et une hauteur comprise entre 6 mm et 160 mm. Vevor à apporté une modification sur le système d'aspiration en augmentant le diamètre de sorti , maintenant on peut branché un gros tuyaux et ils ont mis un adaptateur pour un diamètre plus petit. Dans l'ensemble la machine est très fonctionnelle avec un rapport qualité prix très intéressant, je l'ai obtenu à un prix de 265€ franchement à ce prix je ne regrette pas mon achat.

Funciona de maravilla! probada en madera de pino, eucalipto y castaño, desbasta muy bien y dando la ultima pasada a 1/4 de vuelta deja un acabado muy fino. Por el precio que tiene de momento funciona muy bien, en un dia se cepillaron unos 14 escalones de madera con sus contrahuellas y quedaron perfectos!

Couldn't beat the price. Have everything else, just needed a planer. I shopped around for many products and read all the reviews, didn't need to spend on the pricier planers for what I need it for and it comes with a stand! Not much in the way of bells and whistles, but it works great! When I first got it, I checked all the adjustments, actually they were right on, so on to the first test. I sent a couple different woods through and checked them for snipe. Not bad maybe a little in the beginning and the end of the last board! Fairly quiet. So the things I don't like about it is (1) dust collector hookup is some funky size, I took about 3 times around with electrical tap to make it tight on a shop vac hose. (2) dust collection is right over the exit for the wood, so I used a 90 fitting, no biggie. (3) The gauge for thickness is pretty worthless, but I don't need anything that precise. Other than that, this works great, easy to setup, nice level table, and it has a stand that comes with it! Here's a tip putting the stand together, lay out the parts and remember it sits in the stand, not on it.

My husband loved it and was perfect for his wood shop

Llego antes que esperado, funciona muy bien para lo que me hace falta. Muy contento con la compra

Specifically purchased this unit for a project to take a whole wall with slab wood and dark stain job applied and resurface and remove the old finish. It worked great. The trick was to find the right setting to take off the old finish and leave a well-planned surface. The trick I found was to raise the inlet higher then the peice of wood, insert the wood. Lower to unit unit it meets the wood service. Back off 1/2 turn to remove the wood, then 1 complete turn back down. Then run the wood through and worked great. I did a whole wall about 35 peices and it worked great. Used the shopvac with the supplied waste manafold and it worked well also.

Una maquina muy buena.Le doy la maxima puntuacion.La he usado bastante y con muy buenos resultados.Estoy muy satisfecho con esta compra

Bonne efficacité et rendu sympathique. Beaucoup de copeaux pour amincir mes planches mais le résultat est là !

Simpel , makkelijk te gebruiken , zeer goed resultaat