Reseñas de clientes para VEVOR Kit de Reparación de Anclaje para Postes de Valla, Paquete de 6 Estacas de Soporte para Postes de Valla de Acero Resistente, Estacas de Anclaje para Reparación de Postes de Valla de Madera Rotos

I have only used one of the four so far, and a little bit of excavation was required behind the crooked post. once that was done, the post anchor held the post upright and, as a bonus, reinforced the post close to ground level. Works well, well made, received in good time. Yes, I recommend.

good . As expected. good Price.

die Teile sind zweckentfremdet aber leisten beste Dienste sie werden für eine Verriegelung eingesetzt

These are very solid and heavy duty, worked great for my use although I do agree with other reviews that it would be good if they were a little longer in ground - I concreted in not just hammer into soil and was rock-solid after that. Seem very strong and well made so besides being longer (further in ground) for cases other post is completely loose as a possible improvement (and they do give dimensions so you get what it says!), I cannot fault.

These work great, but 1 cracked under extreme winds before I could complete project.

Unusually for Vevor these are subjectively a little on the light side for the job. They do appear well made but I think that they should be galvanised before painting to avoid corrosion in the ground.. Very good price for a set of 4.

Quick and quality is great

They are easy to be installed provided the ground has no rock or you use a hybrid method. The screws came with the packet are ok but the screws driver is about half inch that his no good.

Didn't care much for this one, harder to drive in the ground than shown.

Title: Anchors break at the welded seams I purchased these fence post anchors and unfortunately they are not strong enough at the welded joints. During normal installation, the anchors started breaking directly along the seams, as shown in the photos. These high-stress areas need to be reinforced and properly welded all the way through. The current welds appear insufficient for the forces the anchors experience during installation. The overall design is useful, but the welding quality and strength of the joints need significant improvement. I would not feel confident installing these for customers unless VEVOR reinforces and properly welds these critical areas.