Reseñas de clientes para VEVOR Kit de Cama Plegable Tamaño Full Kit de Hardware Mecánico para Cama de Pared Vertical Soporte de Marco de Cama Resistente con Palanca Neumática Ahorro de Espacio con Gabinete Plegable

I've built several Murphy beds. This was the first manufactured by Vevor. The price is great, less than one-third what I paid for the other kits. The instructions are OK, not nearly as detailed as the plans I received with the more expensive kits. I would not recommend this for someone with beginner wordworking skills. You have to intuit a few things when putting this together. The hardware is good quality and the templates eliminate some of the measuring for hardware placement, but you'll really have to put your thinking cap on to make this.

Excellent quality product. Instructions we clearly and easy to follow. All components were of a high standard and clearly labelled. Good child-safe gas struts prevent it dropping while opening. If using with lighter mattresses extra weight will need to be added to keep the bed down (I used a small concrete slab) Would recommend!

Hardware is very solid and good quality. Instructions are very poor, all measurements are in metric, required material is 1" plywood along with 3/4" plywood. Most people in Canada would use only 3/4" plywood for complete build. Converting the measurements is confusing because the metric to inch conversions are unusual sizes and the tolerances are somewhat tight. I am a cabinet/furniture maker with a large shop and I found it complicated build. Just rewrite the instructions with your material choice and convert everything to imperial if that is what you prefer. it is still a much cheaper kit than a lot of the others with the fancy instructions.

good quality product, but the plan is designed for the use of 1 inch materials and not the industry standard, example melamine which is 5/8 inch (16 mm) or 3/4 (19mm)

instructions are iffy. dimensions are off. the template for the side panel "L" bracket was wrong. the bed rails stick out from the top of the cabinet 5 ". you need to cut 5 1/2 inches off the bottom of the template for the bed rails to fit inside the cabinet. cabinet height called for of 82" per the plans. then you have to cut the legs off 7 1/4 " measure from the foot and around the bend. so far every thing else fits with a little finagling.. mount the foot bracket at a slight angle so the modified leg is straight up and down.

Ordered a vertical flip Murphy bed kit but received a side flip kit. Raised a ticket and found customer support very poor. No solution just said it was the right order delivered