Reseñas de clientes para VEVOR Juego de Machos y Terrajas 110 Piezas Tamaño Métrico de M2 a M18 Kit de Machos y Troqueles con Maletín de Transporte Portátil Herramientas para Construcción Reparación de Automóvil Fontanería

You can't complain for the money, it's a cheap alloy tap and die set, but it is very comprehensive and beats having to buy a new tap every time you need to run a thread for a different pitch screw. Well worth it.

I have yet to use the taps and dies but on receipt and checking them out- The good: A very comprehensive set which will cover all my metric thread needs. Case to hold all the items in. The Not so good: The dies had a lot of swarf left in them - will sadly really need a decent clean and flush before use. The Tap&Die holder handle threads are not a quality tight smooth fit, rather loose, could be better. Some items are a very tight fit (too tight) a fit in the case, good to not have things loose, but not so good when they are difficult to extract. Not sure what the "The storage case comes with pearl cotton cushioning, providing excellent shock absorption and cushioning properties" specification is about, I found no such material in the case holder slots, just plain plastic.

Oh man. So, I guess I can preface this by saying that I do own a machine shop. I bought this for home use. Quite a few of these taps will destroy a hole more than fix it. I *have* encountered a usable tool in this kit, but it is very much a grab bag of good and bad... Realistically, if a person was planning ahead, you would be better off buying one of each size bolt, slitting it off center with a dremel, and putting them in a box. That would be more reliable and do a more consistent, better job... Unfortunately, if you are buying quality taps and dies, this price would only buy two-ish smaller, or one of the larger pieces... but, it IS incredibly frustrating when you need to tap a 6mm hole, you have three "new" taps, and none of them will do the job...

Prisvärd pra produkt

de la grosse merde casse comme du verre c'est le taraud qui s'usine même dans de l'alu tourne a gauche aussi solide qu'une motte de beure

Filet et taraud ne corresponde pas au diamètre indiqué tout est faux coffret inutilisable dommage

Taps are kind of useable none of the dies are even close

Produit acheté récemment, qualité très moyenne! Ne correspond pas à mon attente. On n'en pour son argent pas plus.

Very weak, not worth.

I received the tap and die set within the promised delivery timeframe and it arrived complete and undamaged. That’s where the good part stops. I had to use the m10 tap to cut a thread into a piece of steel. I drill an 8.5mm hole as required for an M10 tap and I used the handle that you secure the tap into. Before I had finished the tapping process the handle snapped. I was only tapping a thread into a 5mm pice of aluminium. I have had to go out and purchase a new handle to be able to continue using the taps. I was really disappointed as I was optometrist that this was going to be a really good set. I’m fortunately this was not the case.