Reseñas de clientes para VEVOR Horquillas para Palés para Minicargadoras con Bastidor de 1270 mm, Horquilla de 1220 mm, Receptor de Enganche de 50,8 mm, Manguitos de Lanza, Carga de 1814 kg Compatibles con Tractores JD

¡Resistente! Muy bien construido, con una gruesa capa protectora. El precio fue competitivo y la entrega fue rápida.

todo muy bueno, llegó en dos paquetes distintos, pero al final todo genial buen material y me ha gustado mucho

For the most part decent set of forks. I have a issue where you unlock the right fork to slide it it hits the bolted on frame up top. Bolts all lined up and nothing looks to be bent im not sure what im going to do now but it wont let the fork slide out keeping them narrow together

I never lifter more than 4000lbs (but pretty close often), and the rack bent a lot. The bottom also bend from accidently putting down pressure. Clearly mild steel on the slides where 400 or stronger plate should have been used. The forks themselves are great, and honestly, the rack and forks are cheaper than a pair of forks everywhere else, so I'll fix the rack and still save.

I can't rate the forks because I never got to use them. I purchased the forks along with the purchase protection plan. I was very glad that I paid for the protection. (FedEx strikes again) FedEx really screwed the whole experience up. Somehow the item was listed as damaged and showed for a week as sitting at my local FE warehouse and no delivery update. This met the requirements for a refund per the protection plan. Vevor refunded the purchase. Some days later FedEx delivered a badly damaged box to the house. It contained a pallet fork frame, one pallet fork, and no hardware. The pallet forks are useless if not complete. I would like to say thank you to Vevor for refunding the purchase. If there were other delivery options than FedEx I would order a large item again but likely not until then.

Haha. I buy lot's of Vevor stuff and normally pretty happy. These however are terrible. First they dont fit my Bobcat s185. The bottom lock locations are about 1" too high. After I fixed that,i went to lift a 2200 pound lift of wood. They completely failed. The attachment plate and forks bent about 15 degrees. I then used my bale speer attachment to then lift and move 5 of these bundles of wood, without any issue haha.

First purchase from Vevor. I purchased the set up because of the free delivery and that it had the trailer hitch receiver. Received base plate and 1 fork very quickly. Took a couple weeks to the 2nd fork thru customer service. Hitch receiver failed in its first use on a relatively light aluminum enclosed trailer. Forks still functional but I’ll probably have to do som welding to strengthen the assembly. Won’t let me upload pics????

Box delivered ripped open and all hardware missing. One pin for fork was laying in the driveway before the box. Ring video showed fedex driver struggling with box and you can clearly see box was damaged before leaving the truck.

First, the good: these pallet forks are way more robust than I was expecting. Having the 2" receiver welded on as well as the hay bale spike are some nice add on features. And the shipping was super fast as things generally are from Vevor in my experience. The not great part is the fitment to my Massey Ferguson tractor. The spacing of the SSQA hook up points could be a little bit bigger (wider) so hooking up would be easier if there were a larger margin for error. The angle of that hook up point is too steep to really connect properly to the universal SSQA plate on the tractor. So now the pallet forks aren't really seated as well as they should be for safety, and the bottom pin bore is also too small. This will require some modification with a grinder and a hammer. Lastly the fit and finish of these fork definitely could be better, with slag all over the top and the powder coat/paint chipped off before I even use the things. For all of this, I should have just paid the extra $200 for the factory pallet forks from my dealer. Now I need to try and return these big things

Went to lift a pallet of blocks, and both the fork base tacked onto the skid steer plate broke off. I added 1 1/2 inch angle iron around base and welde forks into place