Reseñas de clientes para VEVOR Gato de Tijera para Moto Capacidad de 500 kg Elevador de Motocicletas Altura de Elevación 12-39 cm Elevador de Tijera de Acero Plataforma Antideslizante de 37x23 cm para Taller de Mantenimiento

For the most part it seems okay, but the hydraulic pump cylinder doesn't work as it should. It's as if it has to re-prime every time you use it. You keep pumping and it just doesn't go anywhere. Also, the design of the lever for the pump is really screwy, it hits the wheel every time you pump it, and it hit's the ground before you really get the full stroke in.

What I liked was the promptness of delivery, the communication level of contact throughout the process. Packaging was also good. What I don’t like is the poor build quality and lack of attention to detail. When the article arrived, was unpacked and assembled, there were parts missing. No means of securing the release shaft to its screw. Then the foot pump either didn’t raise the platform or barely worked at all. The pump was losing pressure and wouldn’t raise the platform with normal operation.. Rather than return it to the mainland from Tasmania, I took a look at what might be causing the problem. Here is what I found.. The screw on the release valve seemed to work ok but the foot pump shaft itself seemed very loose in its mount. The problem was in the thread fitting guide nut which screwed into the base plate and through which the plunger passed was loose and had been jammed very tight, probably to compensate for the poor fitment at assembly time. Thread tape and reassembled and now it is working ok. But not great. This reflects poorly on the product and the company and proper quality control would have caught it early before becoming the customers problem. A customer should not have to carry the burden of poor workmanship upon receipt of the goods at any time. I’m scarred by this purchase and advise those considering a purchase of this model to be very suspicious of these things I mentioned above. I eventually got the jack I paid for but not without fixing its problems first.

Not that steady as it looks and very heavy considering its size

Wasn’t hard to put together. Fits under bike and lifts easily and can move with the bike on it. HOWEVER, it is very jerky when trying to lower it slowly while the bike is on it. It’s very disturbing.

the hydraulic jack is leaking oil right out of the box ,i did open a case with vevor and will see how its handled ,if they handle it well i will redo this review , if not dont buy this

The unit cannot lift to the maximum height, maybe not sufficient oil in the hydraulic system.

This is the second of the hydraulic motorcycle lifts I purchased. First one was more money but good quality. Now they are cheaper but the quality is junk. Showed up broken in the box. I made a warranty claim over a month ago and they sent the wrong parts. Horrible customer service. Generic responses.

I've bought a lot from vevor. Rarely disappointed. Good build price etc but! Not exactly as described in video and manual. Locking device is shown as 3 dowels welded onto base frame either side for locking device. Mine came with 3 little indents approx 2 mill deep either side for mechanism to register against. Scary ,I'll have to modify to increase safety. Not impressed.

Product came damaged. Took what I thought was a long time to replace it as I had bought extra shipping insurance. Product is ok. The replacement process less so !

La goupille qui tient la vis à lâché ainsi que le roulement. La moto, une klr 650 ne fait que 160 kg. Je l'ai arrangé avec une goupille, la moto était démonté et j'avais besoin du cric. Du coup je n'ai pas fait marché la garantie. Je ne conseille pas cet achat.