Reseñas de clientes para VEVOR Enrutador de Palma Base Fija 800W 10000-30000r/min Herramienta Compacta de Enrutador de Palma de Madera Carpintero Trabajar Carpintería 6 y 8mm Fresadora para Madera Ranurado Tallado Conformado

Hi, this is my 3rd vevor item purchased. I did prior purchase a vevor router bit set for my bosch plunge router - very happy with that. i decided that larger plunge router was a bit big for some of the smaller work and the reviews on this item was good, so as my other vevor items all turned out good i decided to purchase it. The combo hand trimmer with plunge base is still out of stock so i purchased the standard unit with the bit set, good buy for approx $86 AU On receiving it the quality and feel is good - i agree with other comments here on on other social media It is a please to use and fine carving / lettering is very easy, it also has a led light which the bosch lacks, plus it is one of the few routers at this price with slow start and variable speed Negatives are very minor 1. the plunge base was to loose, i had to tighten it up not a problem - s simple 5/6 head head ( used for steel fastners which i have plenty of fits) , but after a month and say 40 hours use i noticed the plunge base starts to slip a bit, but a simple tightening of it works fine, i notice the flip handle starts to go of centre - that is the early warning sign 2. the bits did into fit in the collet, it was almost that the collet is drilled 1/4 the same as the bits, i solved this with some wd40 silastic spray, about 60 hours use later and it is fine 3. i used it once for about 30 mins and the base started getting warm, there was no smell, so i guess the metal body was just conducting heat out from the motor and spindle, it is not a fault just a comment, i gave it 5 minutes and wore those thin cotton gloves just in case Wish list 1. i wish the base was much larger it is about 3.5 inches which is close to 85mm, it is fine for trim edging, but using it to car letters and signs, means that on a larger wooden work area once you level cut out some material, the router is not sitting on a constant level area. Now this is not the fault of the machine rather the use i have for it, but it will be solved once i purchase some perspex and make a larger base plate say 6 inches / 15cm 2, If vevor could stock the original base as a spare part, i do not see it anywhere - also if they offered for sale a larger base plate as a optional extra Overall the machine is great, be carefull with the router bits and speed of use, if the material chatters you are to slow speed or our feed rate I have used a 1 inch flatener bit to skim down wood, and the machine handles that size bit easily Very happy, if i do much more work i will purchase another one and make a router box and permanently mount is upside down in a table Regards George

works well

Vienen dos cabezales para las brocas pero solo entra la de 6 la del número 8 no entra en ninguno.

fait le job !! bon rapport qualité/prix.

A great trim router. The only constructive feedback I have for the Vevor Team is that: 1. I had to use wet and dry inside the collar where the bits sit into as it is a strenuous job trying to get the supplied router bits in (too tight) I was warned of this by another person who had the same router. Using the wet and dry created just a fraction of a millimeter more room and makes it easier to swap out bits but still keep them secure. 2. The body clamp that has to be released to adjust the depth of the router's bit needed to be adjusted as it was too loose and on my first use the main body turned within the clamp. It was only a slight adjustment needed to the nyloc nut but I hadn't realised it would be delivered slightly loose.

it works fine. the only issue out of the box was a bit of burr on the base . I filed it and now it's alright

mooie machine snel geleverd.

Does what it needed , to get the job done. Compact. For a corded tool it was great. .................

Brilliant value for money. Haven't been able to work the offset base yet but haven't spent much time with it either.

Haven't had a chance to use it yet, but when it came in it was poorly packaged, and the package was damaged. Did plug it up and it ran.