Reseñas de clientes para VEVOR Elevador Magnético Permanente 100kg Imán de Levantamiento 92x61x73 mm Factor de Seguridad de 2,5 Polipasto de Neodimio N42 Soporte Magnético con Gancho para Manipulación de Materiales Magnéticos

Se ven muy bien y bien terminados, la palanca de magnetización un poco dura. Todo bien ********************************************************************************************************************************

Aimant faisant le job, mais attention beaucoup moins puissant sur tôles fines. Lève sans problème une tôle de 12mm en 1500/3000 mais pas une tôle de 4 dans le même format. Construction un peu légère pour un produit très lourd (reçu abimé par le transport) mais bon pour le prix...

Magnet was easy to put together and easier to use. The plasma cutter was easy to assemble but did notice some quality errors as the plastic nut on the base of the plasma torch was cross threaded I was able to make that a quick fix though.

Works great handle screw came out pretty easy but other than that haven’t had any issues all around function works great

Works well, simple to use and very strong. Handle machining is a bit rough, purely cosmetic and doesn't affect functionality.

Works great on 1/4 or thicker 4x8 sheets. Any thinner the sheet well flex and fall. It must be placed dead center. If it's on an angle it will drop it.

Overall, a great value. One concern is that we had two magnets purchased pull tested by third party. Magnets advertise a 2.5 safety factor, which would have a breakaway point of 2200lbs. One of the units tested achieved 1900lbs, the other was 1700lbs. Not a huge concern, as they both tested well above pulling capacity, but we will monitor as they are re-tested every year. Only other concern is lack of spare parts availability. We use magnets on daily basis, so components need to be replaced periodically.

Leider rastet der Hebel/Arretierung nicht ein,hatte bisher aber noch keine Muße mich darum zu kümmern. Entweder muss ich ihn zurückschicken oder habe ich etwas falsch gemacht?

The magnet itself works fine, however, moving the handle from off to on is literally impossible without a 3 foot cheater bar. I'm 6 feet tall and 240 pounds...Big construction worker... This thing has so much spring tension on the handle that if you're not super careful and very strong it WILL break your wrist when you disengage the magnet due to the spring tension against the handle stop. I don't know if it's supposed to be so difficult to engage/disengage or not but it takes in excess of 100 pounds of force to actuate the handle back and forth to lock and unlock the magnet. Don't buy this if you're not 100% confident in your strength and ability to use a BIG cheater pipe!

Pésima conpra , no resistente ni 45 kg decepcionado