Reseñas de clientes para VEVOR Elevador de Placas de Yeso, con Brazo Telescópico Ajustable de 1245–2921 mm, Carga de 68 kg, Altura de 3353 mm, para Montaje en Techo y Pared, de Acero Q235B, 1530 x 1530 x 1450 mm, Rojo

Compré esto para fijar tableros OSB de 7/16" al techo de mi garaje, convirtiéndolo en una sala de juegos. Llegó bien embalado y fue facilísimo de montar.

I bought this to put 7/16" OSB on the ceiling of my garage to make it into my hobby area. It arrived nicely packaged. Super easy to assemble. The castors are decent but with a sheet loaded the entire system is a bit awkward to roll around, considerable flex. The lifting winch works really well as does the simple braking mechanism. One person can load a sheet but it is much easier with two people. The upper section has the ability to tilt some to compensate for a floor not being totally parallel to the ceiling. This felt disturbing at first but makes sense. The lift will push the panel tightly against the rafters and hold it well for fastening. I also used the lift to hold 23" x 24' rolls of insulation in place while I stapled the flanges. A well designed product. Minimal material/cost design that works. This is NOT an industrial level tool, treat it kindly and it will serve you well.

It worked great, I had to install drywall on a ten feet ceiling by myself so it made my job so much easier.

great lift but the rods that hold the legs can pop out of the holes and let the leg close and fell over letting the panel land on my foot. I put zip ties on the rods so they could not come out again. i was able to do a 3 man job by myself

I would like to return it Useless bad design small wheels can't hold the Sheetrock