Reseñas de clientes para VEVOR Máquina de Cortar Azulejos Profesional 1200mm Cortador de Azulejos Ancho de Corte 35-1200 mm Cortadora de Piso Laminado Espesor de Corte 6-15 mm Cortador Manual de Azulejos de Aluminio Corte

Maszynka się wygina przy cięciu, regulacja jest mega ograniczona. Wiele płytek po prostu nie chce się łamać. Nie dajcie się zwieźć mega super opiniami i recenzjami, nie nadaje się do profesjonalnych zastosowań.

Je regrette vivement ce coupe-carrelage. Le rail manque de rigidité. Elle éclate les carreaux de carrelage, la coupe n'est pas nette. Difficulté à couper le carreau. Les extrémités des carreaux s'éclatent. J'ai contacté le Service après-vente.

Board is flimsy and handle is too low. I can not cut any porcelain tile strip less than 2 in.

Bonne qualité a première vue Bien pour les coupes droites mais les diagonales ne se coupent pas bien, carreaux cassés 1 fois sur 3 en diagonale en 60x60 cm Sinon laser pratique mais le plateau est trop souple au moment de la découpe et plie légèrement ce qui fais que ça découpe mal

Lazer not aligned, rusting after use, diamond wheel cutting poor.

Low expectations. Had to cut 9.5mm porcelain tiles and thought would give this a go. It cuts just fine. Need to be aware that the centre markings aren't centre and that the cutting and angle guide are not accurate, not helped by one of the retaining screws being bent. But being the cheapest cutter I could find, very pleasantly surprised. BTW, please don't pay attention to many of the YouTube videos of this style that don't seem to understand that you always split a tile from one or other end, not the middle. This cutter is designed so as only to split from the top.

For the price it does the job, but the twin rails are far too thin and weak as when you score the tile they bend. Altho' it does seem to score and cut straight even tho' it's not easy to see the cutting wheel on the marks you've made. But overall it's a cheap alternative to the Rubi cutter I really wanted but couldn't afford at £800. I'm a professional tiler, but as I don't use 1200 x 600 tiles too often I'm fairly happy with this cutter.

„Żadnej płytki nie da się dobrze przeciąć. Nie docina do końca. Kółko tnące jest za wysoko nad płytką. Nie udało się tego wyregulować. Wózek jest okropny. Jakość pracy jest fatalna.”

Tengo el de 1200mm. Esta bien para una utilización ocasional, que es mi caso. Se ve un poco endeble y poco robusto para un uso más profesional. El laser se desajusta muy fácil y cuesta mucho de ajustar. Depende del uso puede servir.

First of all, I’d like to say it’s a very good price which obviously means you’re going to get a cheaper product. If you’re just looking to do a couple of jobs this will get you by. It’s first of all the fence isn’t square and the laser beam is quite far off. You have to Jerry rig it to get it straight otherwise it cuts OK