Reseñas de clientes para VEVOR Cerradura de Puerta Mecánica sin Llave Teclado de 14 Teclas Cerradura de Código Manija de Puerta de Entrada Exterior de Aleación de Zinc Fácil Instalación para Puertas Espesor de 35-65 mm

Relatively easy to install and great value for money. The only issue I had was with the bar length. The bar was too short and slipped out of the licking mechanism when installed so I had to extend and wedge it in with a cut piece from the 2nd bar. Once installed it's operating perfectly.

For the money a really great purchase, did exactly what it should

Lock works well, but rattles in the wind. Delivery 0/10 . I wont order from Vevor again if they continue to use Amarax. Made no attempt to deliver the item, despite several promises- I eventually had to go to the depot to pick it up.

Is a great product I use a few of them no problem so far

Le produit est de bonne qualité. Les instructions manquent de clarté. Il faut relire plusieurs fois avant de comprendre les réglages.

Seems like a good lock for the price. Read the instructions closely as they are so so. Do not cut the flat metal piece that operates the indoor latch until you are sure of the exact length. Also test the lock with door open several times before closing and locking door. Overall I am happy with the lock.

Easy to install and use, nice black finish. Easy to set code but order of digits makes no difference

Just installed. Instructions could be improved and video slowed down to focus on important adjustments.

The door lock arrived faulty, as the front panel is totally disabled and does not work. You can open it from the front but you can not close.

Installation is not easy because of the flat bar for actuating the lock. The instructions are sorely lacking in this regard. One end of the bar has two "dimples" which must go into the combination side of the lock. There are 2 different lengths provide. I found that neither one worked for a 3.5" install and the longer one had to be cut. I cut it too short and did not have a working one because I inserted it the wrong way around. I ordered a replacement unit rather than try to get the part from tech support. Good thing I did too because the original one would not stay open fully, but "rebounded" about .5 inch not allowing the gate to close fully. However once I replaced the combo side3 of the lock with the new unit, it worked. I also rebuild my gate with 2x6s laid with the 1.5" side to mount the lock so that was room for the mechanism without having to add a block.