Reseñas de clientes para VEVOR Cámara de Vacío de 56,8 L, Cámara de Desgasificación al Vacío de Aleación de Aluminio con Tapa de Vidrio Templado, Manguera, Filtro de Aire, para Fundición de Resina, Estabilización de Madera

Good quality vacuum chamber. I used it for resin degassing. No problems.

wow ,, I wish I had bought this yrs ago. I process my own pot to make rick Simpson oil and the vacuum process help remove the remaining alcohol without overheating the oil. it's super easy to open and close. I'm sure you could experiment with freeze drying food with this. the lid for this thing is one heavy flippin piece of glass

Funziona correttamente

Ist wirklich beser wi gedacht gerne wieder denke aber das diie lange hält.

Works superb. Almost 0 leak after 24h in vacuum. Better than expected

I use it to remove water from copper wiring after cleaning automotive wiring harnesses in a water based solution in an ultrasonic cleaning machine. The vacuum pot is completely air tight and hold a vacuum for more than 24 hours down to 200 micron. The only problem is that it is quite expensive in consideration that VEVOR never has spare parts. Let's say the glass lid, the rubber seal or some of the fittings go bad I have to trash the entire unit. In consideration that there is ZERO after sales support the pricing of the item should be about $100.00 less.

Bie beschrieben. Bin sehr zufrieden damit. Einzig die Dichtung zwischen Deckel und Kammer ist mühsam zum Positionieren, da sie extrem leicht verrutscht.

The top on this is glass not plexi that’s why it’s so expensive honestly, I’m blown away. It is huge in this photo. I have 16 pounds of pork tenderloin in it marinating to make jerky. if you’re look in the background, everything is Vyve. Maybe I’ll get a promotional prize or something.

Working well allover, but the inlet port of the green tap is an internal thread (mother screw) and the provided gauge-end is also, so not attachable. I needed to buy third party converter to assemble. It shows in the image an external thread for the gauge mother screw - but I got a "hole" on tap-and. I even was not able to buy a good solution in the local vacuum shop -only patched solution. Othervise it works nice, you need to press down the tempered glass lid by force for a few sec when start evacuating to start vacuum build up.

Good product. Holds vacuum well. Only issue was finding fittings to match those on the hose. I already had a very good vacuum pump.