Reseñas de clientes para VEVOR Calibre de Inglete de Precisión, Ranura Estándar 19 x 10 mm, Calibre de Inglete para Sierra de Mesa de Aleación de Aluminio con Rejilla, 450 x 550 x 120 mm, 15 Paradas Positivas, 2,19 kg

Pushing a longer board it is way too easy to override the spring pressure of the balls and springs, that keep it t tensioned in the slot. It's hard not to deflect a couple of degrees as you push it. Basically if you need the fence your board is too long for this miter gauge, you will deflect the angle and get an inaccurate cut. When I first set it up using a five cut method on a 12" piece of plywood. It wound up at an almost perfect .oo2" on the last cut, right out of the box. As soon as I cut a 6" board 30" long, the cut was about . 020 out of square. Huge waste of money! Find a better miter gauge that doesn't use springs. This might work if you were only cutting short pieces for a segmented ring. Other than that it's junk for standard use. P.S. The problem was not my saw top. It shined up, smooth and very slick. I even made a conscious effort to try and keep it from twisting by trying to counteract the twist as it made the cut. It helps but it's impossible to do repeatedly. Please find one that does not use springs for tension.

Never received item. Vevor camcelled order waiting on refund.

This thing flexes too much, i dont trust it as square