Reseñas de clientes para VEVOR Calibre de Inglete de Precisión, Ranura Estándar 19 x 10 mm, Calibre de Inglete para Sierra de Mesa de Aleación de Aluminio con Rejilla, 15 Topes de Ángulo, Émbolo con Resorte 450 x 650 x 120 mm

This fit both slots on my Delta 36-725. right out of the box it was perfectly square, and the angle markings were spot on. This has the look and feel of much higher prices items, and I have had great success with it. The fence on this has odd slot sizes, so if you want to swap off to a longer Universal T-Track fence, then things get a bit tricky. This uses 6mm. If you want to use the flip stop on a standard alum extrusion, grab a couple of M6 x 30mm Flat Head Hex Socket Caps like are used on furniture, and you are in business. The fence to miter gauge can use standard T-Track bolts and star knobs. For anyone with a shop, this isn't too much of a hurdle. 5 stars. (Get the longer one if it's available.)

Cet outil m'a surpris par sa grande aualité et sa versatilité Je l'utilise sur mon banc de scie Dewalt et il s'adapte parfaitement. je le recommande vivement

good for the price

Qualità prezzo ottimi, calibro ben realizzato e ben rifinito, prezzo supet

thought I bought the one with the extention

Nice tool, high quality material, and sturdy, fit miter slot. I would like two issues, that need improvement 1. needs to have a UHMW tape attached to the bottom of the aluminum bar, to slide smoothly. 2. to be parallel to the table, you need to place a washer between the part that goes into the miter slot and the top sliding part. I used it on a router table to cut 3/4" slot for T-Slot channel, in large plywood board. using it I could support the plywood that was longer than the size of the edge of the table.

Ár értékben teljesen megfelelő. Könnyen kezelhető és beállítható áll. Pl. Hikoki asztali fűrészhez is jól működik.

Nullissime et dangereux !! Le guide sensé être rectiligne parfaitement est en fonte d'aluminium de très mauvaise qualité, ni droit ni plat et les vis sans tête en acier sensées rattraper le jeu ont défoncé la rainure de ma scie sur table car le guide s'est coincé dedans !! Les vis sans tête se dévissent !! J'ai du le détruire pour le ressortir !! À ÉVITER ABSOLUMENT Mise à jour : VEVOR m'a intégralement remboursé le produit après échange avec le SAV suite à mon commentaire. Merci à eux.

the size and weight of the unit becomes a problem with smaller table saws like dewalt, the T-slot rail is not stable enough to hold the unit and only locks (with coin) in the front creating a lot of play at the end of cuts. I will likely build a infeed and outfeed support to hold it more steady

It fit my saw but i want It on the right side of the blade and I cant flip It around so the measument is matching so for me this is not turned out as a great buy, its been stored under the table ever since buying 😑