Reseñas de clientes para VEVOR Caja Eléctrica de Acero al Carbono IP66 Gabinete Eléctrico 30x30x20 cm Caja Impermeable con Placa de Montaje Caja de Conexiones Eléctricas para Equipos Electrónicos Eléctricos al Aire Libre

Historically, I have built these cabinets from components. It is so nice to have a robust outdoor fan-cooled cabinet.

The box is well built and it's really a good design. I really like the cooling fan and the ventilation. However, there are a few flaws to this design. First of all, if this is an outdoor enclosure, it should be bug proof 100%. Yes, there is mesh for the side vents on the inside of the enclosure, but then there is a big gaping hole at the bottom of each vent for flies and other bugs to go live in there. Over time bugs going in there to live and make nests and all that we'll plug up the mesh screen. So there should be a mesh screen at the bottom of each vent where the big gaping hole is for air to flow through as well as one on the inside of the enclosure. And same with at the top where the fan vents out. There's little slotted holes for the air to go out of the enclosure from the fan. And there is a mesh screen between the fan and this little opening where the air blows into. But again flies and all kinds of other little bugs are going to go live inside of there. So where the little slotted holes are there needs to be a mesh screen covering that as well. So no bugs can go live anywhere in this enclosure. Also there are pre-drilled holes for mounting hardware. There's two at the top of the enclosure and two at the bottom. The metal insert that comes with the enclosure is too close to the bottom holes for the supplied nuts and bolts that come with this kit. The nuts that come with it are huge and the holes on the bottom are too close to the insert for these knots to even have space to spin and tighten on. Let alone get a socket bit on there. The top holes are okay. I was able to get the socket on there. But I had to use smaller nuts and bolts for the bottom holes. It would just make sense if the

Excellent quality. Excellent price. Works well as a home for VFD that I nstalled on wood lathe. No fan required for cooling so VFD is completely protected from dust. Box is large enough that acts as a heat sink and VFD remains cool.

Non standard 30mm holes are a bit annoying, build seems decent for price. Shelf a bit flimsy for my use case but box overall is quiet heavy. See how it stands up over time. Freight was biggest hassle with 2 x 3rd party carriers getting involved before I got it over a week late :/

I would prefer a different lock/latch but overall it is a good panel.

Cette armoire électrique est correspond à mes attentes, acceptée par EDF ENERDIS pour ses dimensions et son fond métallique, elle dispose d'une fermeture par clé. C'est la qu'est le problème, les clés sont en plastique chromé, et l'armoire peut être ouverte sans la clé par quelqu'un d'un peu débrouillard.

great price and quality

nice heavy construction. work excellent for my application.

Didn't know what to expect at such a great price but these 4x boxes are as good as any Hoffman or Weiger(sp) boxes that I have ever seen. Will be ordering more.

Works amazing built out of thick steel heavier and stronger than I expected will be buying more for PLC enclosures