Reseñas de clientes para VEVOR Caja de Lastre, Lastre de Tractor de Categoría 1 de 3 Puntos Carga de 362,87kg para Receptor de Enganche de 5cm Accesorio de Cargador de Volumen de 0,12m³ de Acero con Puerta Corrediza, Rojo

Ordered this item and it arrived in a prompt manner and in good condition. Appears to be fairly well made with decent welds and gussets. However, it was advertised as a CAT 1. The unit that I received appears to be CAT 0. It is not compatible with my Kubota b2100 or my rk25 or my rk37 all of which are CAT 1.

Where do I start – Pins are NOT CAT 1 size as mentioned in other reviews. But on top of that....The Overall build quality and Steel is very light for the intended purpose. It’s a a weight box so it should hold weight, right? I have it filled with FIVE 55lb sand bags and it distorted the box itself and one lower 3pt pin has bent. The Hitch receiver is very light duty and too large to hold a standard 2” square receiver. This product is a perfect example off shore production without quality control...the size of the weight box and implement holders are great, as is the price point, but it is substandard. The implement holders also need drain holes in the bottom to drain rain water. I took it to a welding shop to have it beefed up and it cost $100, now it works well. I still have to find and upsize the 3-point hitch pins to 3/4.

Opened it up and looked great... then I started to unbox it and the paint literally fell off the top. Pins on bottom are very small and needed to be replaced as they do not fit a vevor quick hitch. Honestly one of the very few things I would never buy again from them. I would not recommend it.

FedEx never delivered to the right address, did not provide a picture of the package delivery . Probably delivered to another location. No solution yet

Half the size it shows it's a photo shopped picture online

came with wrong sized pins that had to be swapped out via TSC.

tl;dr - Product not as described. Includes Cat 0 lift pins, not Cat 1. Geometry of 3-point connections is incompatible with Quick Hitch unless you have the means to permanently modify the parts. Top link pin not compatible with commonly available Cat 1-2 and Cat 2-3 bushings. I was excited to order this after what seemed like a fair number of positive reviews and some YouTube info. My goal was to fill this with scrap metal and concrete to have a more compact ballast box. I have a quick hitch with adjustable top hook. The box itself arrived safely and seemed reasonably sturdy. My satisfaction started to wane when I realized the lift arm pins included are category 0, not category 1 as advertised. Sure, there are bushings included, but Cat 0 pins are narrower and shorter than Cat 1 which makes installing QH bushings impossible without modification. After a bunch of back and forth with support, and promises to send adapters (with no indication that they understood what I was explaining), I took matters into my own hands. I split a piece of 3/4 tube stock, doubled it up, and welded that onto the pins. I then took that and fit it into the QH bushings and welded those together. Lift arm pins fixed. Next I got a set of Cat 2 and Cat 3 bushings for the top link only to find that they won’t go over the included top link pin. No problem - I have spares. With bushings installed, the hook on my QH does not properly fit the box. Either the lift pins don't sit in the hooks on the QH or the top link pin doesn't sit in the QH hook. To get all three to make contact with the QH, I had to remove all the top link bushings. My QH top link hook, even though it's adjustable, does not mate with this item the way other implements do. While I was able to make this work, it was a pain in the neck. If you have a quick hitch, DO NOT expect this to work without permanently modifying it. Also beware that the 3-point geometry is out of whack. If you’re using a standard top link and lift arms, you’ll be fine.

It has been over a month...still have not received this item.

I called vevor to verify this would fit a John Deere cat 1 hitch , and was told it would , and it's not even close. I would recommend something different.

Ballast box is advertised as category 1 but is actually category 0