Reseñas de clientes para VEVOR Bomba para Hidrolavadora Émbolo Triple Horizontal con Eje de 19,05 mm, 3300 PSI 2,5 GPM, Kit de Repuesto para Hidrolavadora con 5 Boquillas, Compatible con Simpson MorFlex 40224, 40225, 40226

Adorei o produto. É muito bom

Bolts right up and pumps fine. I wish they'd use hex head bolts vs socket screws. There's no way to get a dead-on allen key in there so you're left with either cutting a right angle hex key down or making a ball hex make it "good enough." The oil vent cap didn't screw properly and was a tight despite not fully threading down. This allowed water to get into the oil (milky/cloudy appearance). Thankfully, the sight glass is easy to check and I went ahead and changed the oil - I used SAE 30 Non-detergent - it takes approx 5oz of oil. You can verify in the sight glass when it's covering the dot. To change, you can either siphon the oil out or remove the drain bolt on the bottom. I retightened it with slip pliers until the O-ring was snug. I confirmed with a pressure gauge that the pump is preset to ~2500PSI @ open and closed triggers @ ~3100PSI from a 190CC engine. Seems to work a bit better than the cheap vertical engine pumps but I'll update my review soon after an extensive test.

Works great.

Fit and Worked perfectly. turned a multi year failing pressure washer into something usable.

I bought this pump due to my old pressure washer hemorrhaging oil from the engine. The old one was of a vertical sealed design and I saw these pumps on Vevor.ca and decided to buy one to mount to one of my other small engines (as shown in the pictures, it is an Ai Power EnergyCube 208CC Honda derivative that I used previously on snow blowers). Overall, the quality of this pump seems pretty good for the price and saves me from paying several hundred to a thousand dollars for a machine with a potentially lesser pump. This one being where I can check, change and add oil is a plus. It seems to deliver on its set specified pressure of 2600 PSI and if I need to in a pinch, I can adjust it up, but I would want to get an in-line pressure gauge so I would know precisely. For my tasks the pressure is fine and if and when I want a bigger unit, I have that option down the road as this will fill my needs for now cleaning lawn and garden equipment, my gutters as well as washing cars. As shown in the photos, the unit sits on an old delivery dolly modified for mounting an engine and I had to order some rubber vibration engine-genset mounts so the thing doesn't shake the dolly apart or make too much noise. I was originally planning to mount it to the old pressure washer cart my old one occupied but that would require some fairly serious modification as it originally held a vertical shaft engine and pump. An important note is make sure you have anti-seize for the fasteners and engine shaft if you ever have to remove the pump again. PROS: - Came complete with everything needed to mount it to an engine as well as some extras including a solution mixing hose and spare O-rings. - Pretty well made, premium feeling pump, so far, following what I found with other Vevor branded tools and power equipment. CONS: None so far.

works well, many thanks

Nickel se monte sans problème sur un autre nettoyeur haute pression donc les pièces n'existe plus bravo pour la rapidité de livraison en 1 jour vous êtes au top du top 3ncore merci.

Perfect for replacing my original pump.

Great price, Direct fit. Spare nozzles are very nice as I often loose them.

I bought one and it went out after couple of uses. Bought another and it has lasted for about two years. The price point is pretty good .