Reseñas de clientes para VEVOR Bomba de Vacío 3 CFM 1/4 HP Cubo 12 L Carcasa de Aleación de Aluminio Bomba de Vacío de Aire Acondicionado 1720 RPM 220V Bomba de Vacío para Desgasificar Siliconas, Aceites Esenciales, Uretanos

Fonctionne parfaitement Qualité bonne Très bon rapport qualité prix

Jakiś czas temu kupiłem ten zestaw, spawdza sie i polecam

Great quality from Vevor again. Quick delivery and exactly what’s been advertised Very easy to use.

Veldig fornøyd med denne vakuumkammeret. Pumpen fungerer godt og kammeret holder vakuumet bra. Enkel å bruke og et veldig nyttig verktøy til støping og avgassing av silikon og epoxy. God kvalitet til prisen. Anbefales! ⭐⭐⭐⭐⭐

`Just received the pump, assembled it in one minute by hand (no tools or lube, so probably not a perfect seal), read the warnings, and turned it on. The pump is very quiet, beyond what I expected. It pulled the 3gallon chamber to -0.95 bar in about 30-40 seconds, enough to destroy a small balloon I accidentally left in the chamber. :) The pump produces some vapor (it isn't really smoke I think) past -0.5 bar, but from what I read this is normal behavior. It holds the vacuum impressively well. Remarks: 1. The oil in the pump was at min-level, so I had to add most of the extra bottle to get it to almost max. 2. The pressure gauge wasn't entirely filled with glycerin (not sure whether that is a quality issue, but still). 3. There are no 'convenient' handles on my 3gallon chamber, it's just a pot.

Jeg bruker vakuumkammeret til degassing av silikon og epoxy og den fungerer helt fantastisk både til små og store mengder! Pumpen er kraftig nok til at vakuum oppnås på under 1 minutt. Produktet er enkelt i bruk og ser ut til å ha god kvalitet. Veldig god pris! Bruksanvisningen er litt for kortfattet, men jeg tok kontakt med Vevor kundeservice og fikk rask respons og god hjelp - veldig fornøyd!

Totally fine for the price

Love this for my resin and silicone mold making

Since this is my very first vacuum pump in life, I don't know if it's normal for oil mist or smoke to come out of the filter when evacuating.

De vacuümpomp en vacuümkamer worden gebruikt tbv het luchtvrij maken van epoxy. Bij het mengen van de epoxy-componenten A en B krijg je altijd te maken met luchtinslag; deze luchtbellen zijn mbv de vacuümpomp en vacuümkamer goed te verwijderen. Bij het gieten van de epoxy krijg je vervolgens volledig heldere epoxy plaatjes.