Reseñas de clientes para Bomba de spa de 2 velocidades VEVOR, marco 56, bomba de spa de dos velocidades para jacuzzi, 1600 W/39 m³/h/15 m de alta velocidad o 400 W/19 m³/h/3,9 m de baja velocidad, interfaz giratoria de 90° con puerto de 2'' para jacuzzi, certificación TÜV

The low speed for circulation on my hot tub pump motor was failing. And this beautiful motor/pump was a perfect replacement. I'm 71 years old and was able to install myself. Vevor comes thru again. Now I am waiting for delivery of a 2000watt PA system from Vevor. Can't wait.

Bought this pump as a replacement for my failed Executive 56 pump. Ensure you purchase the pump with the proper fitting size for the PVC. I did, and it was plug and play. Power down the tub, drain if required, unplug old pump from the master panel (remember where the plug was plugged and the direction of the coloured wires). Installed the VEVOR. Twisted the fittings on easily with bare hand, plugged her in and powered up. Quieter than the old one and no issues so far.

Has been working great for two weeks. The installation was very straightforward and the price was good!

Fits perfectly. It was the exact same pump as the original one. It spared me some good money even though i took a 3 year warranty

This motor core was not assembled properly from the factory, due to this the contactor (or capacitor start) board was pressed up and cracked. Plugged it in, tripped my 50A breaker. I notified Vevor, after a bit of back and forth they replaced the unit with a perfectly good working unit. I am happy.

Great pump at an awesome price. Its beenin for a month and seems to be quieter than the previous unit and was a breeze to install.

firts perfect, great pump. cord is a little short for my locaiton.

Très bien, puissante et silencieuse.

Works great! Now I can enjoy my hot tub

Seems to be working fine in our RotoSpa, however it was quite a pain to install. The holes in the mounting plate are closer together than the original, but that wasn’t a huge issue. The big one was that where the pump section’s top inlet (or maybe it’s the outlet?) is not exactly vertical as the original one was. This was a problem because the pipes in the tub are rigid, so I had to shim up one side of the pump to tilt it so it lined up. It wasn’t really that bad but certainly not plug and play. Once installed, it turned on and worked perfectly, plus it’s a bit higher hp so the jets are more powerful which is quite a nice side bonus.