Reseñas de clientes para Base móvil VEVOR, capacidad de peso de 650 lb, ajustable de 12" x 12" a 36" x 36", soporte de base móvil universal resistente con ruedas giratorias, para equipos de carpintería, sierras de cinta, herramientas eléctricas, máquinas

Diseño bien hecho con suficiente capacidad. Esta base era para mi pesado taladro de columna Craftsman de 20" (tuvimos que trabajar entre dos para levantarlo e inclinarlo de nuevo a su posición vertical). Los orificios de montaje no encajaban exactamente donde quería, pero ya lo esperaba. Los soldé en lugar de usar los pernos incluidos.

Well-made design with sufficient capacity. This base was for my heavy 20" Craftsman floor model drill press (took 2 of us to lift and tilt it back to its upright position). Mounting holes didn't line up exactly where I wanted, but I expected that. I welded mine together in lieu of using the supplied bolts.

Easy to assemble, very stout. Holds my 8in jointer great.

I purchased this mobile base for my new Jet Drill Press that weighs 282 pounds. I found the base to be heavy duty and constructed and painted very well. The assembly was straight forward and intuitive. I used a piece of 3/4" plywood and bolted it down in the middle of the base and then mounted the drill press on the board. The base has very low clearance and thus minimizes increasing the overall height of the mounted item placed on the base. Love this base and will purchase this unit again for other large /heavy tools.

Excellent product. Works great!

I purchased the mobile base for my Delta table saw. The quality is there and it works perfectly, so easy to maneuver around. I would highly recommend this product. So far everything I have purchased from Vevor has been very well built and excellent quality.

Another winner from VEVOR. I bought 2 of these, 1 for my Sawstop 3hp PCS and the other for my Jet 14” bandsaw. They are super heavy dudy and work perfectly. Thanks!

I had a base for my table saw but it wasn't built strong enough. It used 4 metal corner pieces with wheel casters held together with 2x2 lumber. This base is a beast. Easy to put together and very well built. You can adjust the length and width to suit your machine. My table saw weighs about 200 to 250 lbs. This will make it a lot easier to move around in and out of the garage for work around the house.

Super produit m'ayant permis de transformer mon établi pliable en établi à roulettes avec dessous un espace de rangement.

Bought to put my 30 year old table saw on to more easily move it around. Install instructions are porr as with most vevor products. Easy to figure out Could use about 4 more bolts to hold the frame together better.