Reseñas de clientes para VEVOR Barra de Dientes para Cucharón de Tractor 1800 mm Barra de 9 Dientes para Cargador Tractor Compacto Carga de 2000 kg Atornillada para Excavación Eficiente del Suelo y Protección del Cucharón

Excellent fit, strong material, works as intended and will definitely purchase more products

I was looking for a simple option to add teeth to my tractor bucket. This product worked out great. It allows me to easily add and remove the teeth for different projects without much hassle. Simply loosen or tighten a few bolts.

Heavy duty and makes a compact tractor even more versatile. Easy to install and take off as needed. Worth the money.

Works grest

Item has described, would buy it again. Love the Vevor value!

Very well built and strong

The inside dimension of my JD bucket was 49.5". So I welded on a small piece of angle iron to each end of the tooth bar and bolted it to the bucket. I didn't use the through bolts for the base, I used the supplied set screws. If you find the bar slips off the blade edge, add a few short weld "bumps" immediately forward of where the set screw contacts the blade and it won't slip. You'll then have a removable tooth bar! Great value, recommended.

This bar is probably breakable, but you’d need a heavier tractor than the one I have. I could bore holes in the bucket and put the provided bolts in it, or I could weld it on, but I think I will just persist in taking it on and off with the jam screws provided. It is a great value for raw landscaping.

Lo compre para una pala cargadora de un tractor compacto de 25 HP era un poco grande y la tube que cortar un poco, para cargar arena o tierra que este suelta no hacen falta los dientes pero como son fáciles de poner y quitar .... Pero cuando es tierra dura o hay piedras la cuchara con los dientes funciona fenomenal.

This is my second set. I bought one for my 4' bucket. This one is for my new tractor with a 5' bucket. Throw away or put in stock the drill through bolts. You don't need to do that. Put the bar on after you have removed the set screws that come on it. Mark out the holes for the set screws on your bucket. Put a 1'' weld bead on the bucket at each screw (marked out) on the edge side of the hole marks. Reinstall the set screws, install THE BAR AND TORQUE THE SET SCREWS DOWN TIGHT. Your tractor will now work like a tractor 3 X its size and you can back blade as hard as you want and your teeth will never come off...Until you want them to. To remove simply undo the set screws and off it comes. Best add-on. Greatest value! Once you have a tooth bucket, you'll never go back. I can back blade with teeth on and make it as smooth as my wife's ass. So, really good, but not perfect. Actually shocking how good it works. Larry