Reseñas de clientes para VEVOR Barra de Dientes para Cucharón de Tractor 1300 mm Barra de 7 Dientes para Cargador Tractor Compacto Carga de 2000 kg Atornillada para Excavación Eficiente del Suelo y Protección del Cucharón

I welded it on,,it is as strong as anything made for 1000 dollars,my bolt holes didn't line up ,but I would rather weld it anyways because I am rough on my buckets

Works great for loosening dirt. Easy to install and remove. I plan to use it to build a small pond with my tractor.

I've used and abused these. No issue with them falling off. Just get them good and tight. Perfect fit for my bucket.

I decided to weld it to the bucket and this monster really performs. It is well built and in doings so was able to take a big load off of the tractor by simply plucking trees and brush out of our grove. reduced time by 60 70 percent vs.. a smooth blade,

Great product and affordable. I have a mid-sized tractor and trying to dig and level parts of my yard was nearly impossible due to how hard the ground is. Added these teeth has made the difference!

Nice piece of hardware for my tractor. Nice piece of hardware for my tractor. Nice piece of hardware for my tractor.

I have an older skid steer with a bucket that never had teeth on it. After a lot of searching I found these bolt on teeth. They are well constructed, and did the job after I figured out what to do with them. And here it the reason why I took off one star for ease of use: The documentation. Yikes. Let's not mince our words on who is buying something like this from Vevor: People who are not deeply into the world of heavy equipment. People like myself may need a very straightforward explanation on how something like this *should* be attached to your bucket. Of course, once I figured it out, it is obvious. However, the following bit of verbiage could have saved me a bit of figuring time. "These teeth can be attached one of two ways. By tightening down the hex key set screws you can attach it temporarily. However, if you would like to have a more permanent attachement, drill holes in the blade and use the included bolts" There we go. When written out, it is obvious. Otherwise, the quality seems quite nice for a generic add on attachment, and I feel I will get a lot of use of it. A recommendation for you is if you are going to use the hex key set screws, I would recommend drilling very shallow partial holes where the keys will seat in your blade. This will prevent them from sliding off during something that pulls back.

Well made, Great price. The holes didn't line up with my Bobcat bucket, but it could have been easy enough to drill out the tooth bar to match. I plug welded it instead through the mounting holes and stitch welded it to the bucket. The quality of the bar gave me confidence enough to just permanently attach it.

Fit right

I bought this Vevor 46 inch "Bucket Tooth Bar" with the idea that it was an easy-on-easy off clamp on attachment. I want to be able to switch between other attachments that I have for my 48-inch Terramite loader bucket. Multiple reviews indicated that each tooth has an Allen head set screws that could be used in lieu of drilling holes through the bucket. However, my assembly came only with bolt through type fastening. There is no way I'm going to drill (5) large diameter holes through the thickest part of my loader bucket which is in very good shape. I've purchase other clamp on bucket attachments from Vevor and they work well. I wish the product description had a bit more details about installation. It's not worth the hassle of returning the tooth bar so I'll need to design an alternative fastening method. Pros: product is of good quality and mates up with my bucket edge very well. Price was great and delivery was very quick.