Reseñas de clientes para VEVOR Barra de Dientes para Cucharón de Tractor 1300 mm Barra de 7 Dientes para Cargador Tractor Compacto Carga de 2000 kg Atornillada para Excavación Eficiente del Suelo y Protección del Cucharón

Awesome

This is my second set. I bought one for my 4' bucket. This one is for my new tractor with a 5' bucket. Throw away or put in stock the drill through bolts. You don't need to do that. Put the bar on after you have removed the set screws that come on it. Mark out the holes for the set screws on your bucket. Put a 1'' weld bead on the bucket at each screw (marked out) on the edge side of the hole marks. Reinstall the set screws, install THE BAR AND TORQUE THE SET SCREWS DOWN TIGHT. Your tractor will now work like a tractor 3 X its size and you can back blade as hard as you want and your teeth will never come off...Until you want them to. To remove simply undo the set screws and off it comes. Best add-on. Greatest value! Once you have a tooth bucket, you'll never go back. I can back blade with teeth on and make it as smooth as my wife's ass. So, really good, but not perfect. Actually shocking how good it works. Larry

This Bucket Tooth Bar is extremely well made and is of Great Quality!! It arrived in just two days, packed well and the price was really good!!! I will definitely buy from this wonderful company again!!!!

Great product for a great price. Easily adaptable to my Tractor. Fast delivery.

These worked very well for us. They stay pretty secure on the bucket and come in handy.

Quality was above expectations. It has been beat up and held strong.

My tooth bar came preassembled with the teeth already attached to the plate. THANK YOU FOR THAT! It save me from having to punch the pins all in. My pucket was just under 50" inside width so this was a great fit for it. I have used my bucket a few times to push on trees so it is not a perfect straight edge even though I got it aligned pretty well. This assembly helped strengthen the bucket and I also used it with ropes and chains on the teeth to help lift some HVAC equipment for transport. I think I will keep the bar on for a while to test it out in the woods. It will no longer give you a perfect smooth front edge since the teeth stick down about 3/4" below the bucket surface. I did not drill holes and simply use the large set screws with some HF medium loctite and a impact gun. Lined it up and slowly worked each screw gradually ....pulled my bucket edge even straighter! It is securely attached now and pretty heavy duty...more so than the front of the bucket edge was. I also followed someones advice and topped the setscrews with clear silcone to keep the dirt out. For the price you will not find anything close to this thing and it will last a lifetime. I think shipping was free too which normally would be very expensive!!

Very nice well made installed with Allen bolts. I have put it to the test and I would recommend to anyone.

Had to drill all seven holes in my Mahindra 1126 ,due to being universal fitment. Works great and should last a long time. I have put them through hell and still in great condition. Great price on solid steel bucket teeth. The teeth can be replaced one at a time if and when needed. Overall this is a great product at a great price compared to the manufacturer. Highly recommend product and Vevor.

Very surprised at the quality and the Strength of this bar. A great buy for the quality built . Would recommend to anyone. Easy to install, bolt on or weld on. Just make sure your bucket in an 1/2 inch or less if you want to use the bolt on system. I welded mine.