Reseñas de clientes para VEVOR Abrazadera de Horquillas de Tractor 109 cm Abrazadera en Horquillas de Paletas Carga de 907 kg Barra Estabilizadora Ajustable Horquilla de Paletas para Carretilla Elevadora con Pala Cargadora

So far it seems to be working really good if it keeps working like this, I will raise my score to a 5 all the way across

Compression plates won't stay in allowing forks to move around on the bucket because you can't tighten them up enough. But it works

Forks great just dont fit my bucket well because of step on bucket. Other than that no problem If bucket was flat would mount great. I just got to build something so they will clamp more securely.

These 4000 lb. pallet forks should have come with a stabilizer bar to limit side to side movement, the same as the smaller forks. Also, the screw down rods (2 each fork) would be much better with a nut welded to the plate and the rod would then screw down into the nut. As it is the nut is attached to the screw rod, and as soon as the nut reaches the plate, the whole plate slips and slides sideways. This causes paint to be removed from the plate and constant repositioning of the plate while tightening.. This would not happen if the nut were attached to the plate as the rod would hold the nut and plate in place.

Pallet forks are well constructed and very solidly made Unfortunately, had trouble mounting on our tractor bucket being impossible to secure without using a pice of plywood under the clamp both to stop it slipping when tightening The forks could really benefit from having a connector bar between the two to stop side ways movement Other than that have been quite useful but need to stop and tighten after a few uses

Die Palettengabel an sich ist echt super, aber beim Service gibt es große Probleme. Wenn man sich an den Service wendet bekommt man manchmal Nachrichten in Englisch und dann wieder in Deutsch und dann nicht einmal von der gleichen Person. Dies verursacht ein großes Durcheinander. Als Fazit: Die Palettengabel ist super, aber der Service ist ausbaufähig.

Price was lowered by $27 one week later should have waited to purchase this item and saved some money or maybe they could credit me on my account.

OK for price but cross member broke on first use. will have to weld on stronger box section

Had high hopes that these would work for doing some lifting of pallets with my Kubota 7800. Tractor had no problem lifting, but the screws on the other hand both had issues. Both bent to a point I can't get them out to replace and one fork bent where I attached a chain to improve stability, the chain bent the metal. Yes I screwed the fork to the bucket and then tightened the bolt. Yes the forks were fully inserted onto the bucket.

El producto llegó bien y pronto. El soporte para la pala y las propias pinzas endebles para los bque yo quiero. Las pinzas se quedan cortas para coger los palets normales y endebles para los 1.000 kg. Cómo podéis ver en la foto los soportes de sujeción se han abierto y el soporte de unión ya está doblado después de utilizarlo en poco uso.