Reseñas de clientes para VEVOR Abrazadera de Horquillas de Tractor 149 cm Abrazadera en Horquillas de Paletas Carga de 1814 kg Barra Estabilizadora Ajustable Horquilla de Paletas para Carretilla Elevadora con Pala Cargadora

Good value, one complaint spacer bar between the forks, falls off or moves down when forks are vertical. To fix, I drilled a 3/8 hole vertically through the forks, on both forks and the sliding part that goes over the forks. I used a 3/8 bolt with lock nut and have not had any more trouble with it. Vevor, you might consider this fix. Wayne

Very good for the price! Although the stabilizer could be a little more robust. Bent one end already and locking nuts don’t stay tight. I made a new stabilizer and forks are very strong.

A very good product for the price. Very well built. If needed as a fork lift for your tractor it will work fine. I use them for heavy moving of logs and and trees. Under my application they shift and don't stay square. The tiny lock thumb screw set screws are not useful for securing the forks in a straight position. Overall, if used as directed it is very good product at a very good price.

Good value. Handles on securing bolts interfere with each other and are too short to provide adequate tightness. I use the end of a closed end wrench to tighten.

These are heavy duty, we'll see how the last. The hardware might be the only failing point since it's only grade 8.8 rather than 10.8 or 12.8 which make those extremely soft and prone to failure. Vevor needs to do a better job at protecting their product for shipping, the box looks like it went through a war. It cam with holes poked through both ends and a patch from either their warehouse or FedEx. The package is very heavy, so be aware when you go to move it.

For the price, hard to complain. But if asked I would say the bolts that hold the forks to the bucket are hard to keep tight. If they get loose and you don't catch it, it could cause all kinds of problems. I would rather have bolts with hex heads, and likely will replace them later, so I can tighten easier with a wrench.

Over all I like these forks. After several times using them, there’s something I would change with the clamps. You have to use a cheater bar to get them tight and the threaded rods that’s bent over as a handle interfere with each other. The solution I’m going to implement is cut off the bend on the rod and weld a large nut to the to the top. Then a wrench or socket could be used to tighten each rod. Otherwise I’m very happy with them

Works good, but 1 fell off during operation when backing out of pallet. Othwlerwise I am happy with them.

Took a while to arrive but it travelled quite a distance, kudos !! Great implement addition for my small estate tractor. Completely adequate and adaptable for different tasks. No issues. Good buy. Thank you Vevor!

These forks work great, were easy to install and did the job well. Good Deal at a Great Price. I use thgem 4 to 5 time qa week to move pallets and equipment around and into storage for winter.