Reseñas de clientes para VEVOR 15 PCS Juego de Brocas para Enrutador, Juego de Brocas para Enrutador de Carburo con Vástago de 6,35 mm y Estuche de Plástico para Tableros de Partículas de Madera y Madera Contrachapada

Great looking bit set,haven't used them yet but I don't see a problem with them. The look to made good

Haven't used yet, but it appears to be a nice assortment of bits.

fait son boulot

Shipped fast and well packaged. Would definitely recommend to others. These bit do a great job and I really like the wooden box the came in for storage.

Je n'ai pas prêté garde les fraises sont en pouce et non en mm.

Hi All I purchased these router bits from Vevor because of satisfaction with other Vevor products. This set has a god variety of bits, and i wished to experiment with results. Most of my work has been with pine, but i have used hardwood, fence palings, mdf and plywood. I have made 4 garage workbenches 1200 x 900, rounded the mdf table top and the legs and second shelf. In addition i have made about 20 wood signs varying from 300x 150 all the way too A4 and A3 in size Roman ogee is the nicest, but most common that i use is the corner 9.5mm, cove 6.35 and champher 45 degree for edges After using plastic stencil for lettering i ended up transferring the 2 most common fonts to 3mm plywood, it was done with the 1/4 inch 90degee V which does all of my lettering ( font size 20 to 40mm in size ), it did not cut through the 3mm - i could have easily set it deeper to cut by my concern is the V would be to large at the top and i use a 1mm text pan for outline - so i used for the first time the 1/8th straight bit the plywood sat on old cardbord box and i broke thought and carved all the letters easily. At this stage i am guessing i have done about 600 meters of routing with these bits Routers are a large bosch plunge router and recently i added the vevor hand trimmer Regards George Pretty happy with the results, the bearing type straight bits also have there use but i have only used them a few time.

Nice bits for the occasional woodworker. Probably not the highest quality but certainly sufficient for the hobbyist. I'm very satisfied with my purchase.

Satisfait dans l’ensemble. À voir dans le temps

They seem to be good quality. Unfortunately when I received the package the bits were out of slots and just bouncing around in the box. All in all, good product and fantastic price.

The stile & rail set - ogee bit - II was assembled out of alignment. I disassembled & put back together & it seems ok. Both the bit I & bit II are assembled with split ring lock washers & standard nuts - I will replace with nylock nuts as I know these are safer for such. Thanks!