Reseñas de clientes para VEVOR Sistema de recolección de polvo, colector de polvo de 1450 W, con capacidad de 6,8 L, colector de polvo, ajuste universal para gabinetes de chorro de arena

Works great. Very powerful. It keeps the cabinet clear. My only complaint is that the mounting bracket was welded on slightly crooked, so the canister has a slight lean to it. Hasn't affected the operation of the unit. Poor quality assurance on the manufacturer. Other than that, I like it, should have bought sooner.

I mounted it to the blast cabinet at the hole in the cabinet. Works good but is noisy next to your face. May end up moving it to the wall and use a hose between the cabinet and vacuum. Hope it lasts.

Works great! The only downfall to it is getting filters. They are hard to find and cost a fortune when you do find them.

A must have if you sandblast. Works very well so far so no complaints.Only downside is It is a bit loud but to be expected

I added the vac system to a 60 gallon Vevor cabinet and it works pretty good. The only real issue I had was that the filter wasn't fully seated and I didn't notice it until investigating why I was getting randomly hit with media from the side. The filter is held in place with a wing nut on a stud and it appeared like it was properly seated but if you applied pressure to the side of it (like the dust shaker device does), it created a small gap which allowed media to be hurled at my face. Thankfully, I was wearing a full face shield as recommended. The vac system itself functions pretty good even if it is extremely loud. It could benefit from restricting the intake air on the cabinet somewhat.

Easy to install, came with all hardware and grommets, plug it in and it works, Kind of loud but works great

Nice little dust collector. But the on/off switch died on me after only 1 use! Luckily I had a spare similar switch to replace it. But the switch is junk. Poorly made.

Although everything I read said it would fit my machine, that was false. I had to make several modifications in order to mount my devise. After modifications devise is working find. What it will fit is very misleading. After cutting, drilling it's works as expected,

The dust collector was delivered fast and well packed. Installation was easy. It is too noisy and main problem is that using glass beads it blows out dust which is spreading around my garage. I will look for another solution with cyclone dust separator and vacuum cleaner with HEPA filter.

I have spent weeks building a very nice blast cabinet to my specifications. ordered this with the claim it has a 2" dust collection inlet and that's what I designed every for... Vevor, please explain how any part of this opening is 2" I'll wait. I'll just go back and wast time fixing some things that I shouldn't have to.... thanks a lot