Reseñas de clientes para VEVOR Kit de Línea de Compresor de Aire, Sistema de Tuberías de Aire Comprimido de Aluminio HDPE, a Prueba de Fugas y Fácil de Instalar, para Talleres de Garajes, 200 PSI, Azul, Ø 515 x 325 mm

Definitely not an ideal solution as I had a number of small and irritating installation issues. 1. Maybe I should have gone with 1/2" for my home shop rather than 3/4 as the 3/4 is an absolute bear to bend, and no way will it ever be straight and neat looking 2. Pipe needs to be cut dead square to seal, but with the cutting tool they provide in the kit, it's prety much impossible to get a perfect cut. The cutter is so narrow, there is no way to square the pipe up to the cutter. 3. Now for the biggest issue - the fittings. The fittings kinda have two seals but only one of them is truly effective. The white seal seals to the face of the pipe, so if the face is not 100% perfectly cut (which it will never be) the seal is ineffective. That leaves the circular black seal which sits in a groove and resembles an O-ring, but its not really an O-ring. since it has a beveled surface and sits pretty proud of the sarface, allowing it to easily get damaged during installation. Most other manufacturers utilize an industry standard double O-ring which is pretty much bullet proof. It pretty difficult to get all the leaks stopped as you really have to clamp the nut onto the fitting with a lot of force. And heaven forbid that you push the pipe into into the fitting at even a slight angle as this will cut the black (and only) seal, and you will have to take the joint apart, replace the seal, and them reassemble it. In the end it seems to be working, and the wall blocks are well designed and built, but be prepared to struggle with the install.

The pipe is good but the connectors are bad they leak no matter what you do

Dont buy compressed air lines kits as they can not supply additional fittings if you require them. In my view if you buy 300ft of air line to plumb your shed you will more fittings

The item never arrived,I’m extremely disappointed with the service as I was really looking forward for the airline kit which looked perfect for my new workshop

shiet fails all the time.

The kit comes with nothing to adapt your compressor. You will have to buy several fittings. better off to buy PVC and adapt it.....not worth the Hassel.

Bought this and its missing all my fittings, cutter and everything but the pipe. Customer service is horrible. Wont send fittings and cant get a refund. Dont reccomend

Difficult to work with, very hard to get straight. Kid is not very well thought out you were more than likely need to purchase additional elbows in order to use this kit. If you don’t mind it not being straight it’s a good kid. If you are running more than 5 foot section at a time definitely recommend having a second person to help install it. Once put together sealed very well, but not very aesthetically pleasing because it’s so difficult to get straight.

The whole kit is pretty well made and easy to install. It could be supplied with a few more fittings or a choice to get more for peace of mind. My only concern is the aluminum block that they supply with the kit is useless. All of the 4 port are made using straight (parrallel) thread and all the fitting are NPT, but the thread is so loose every fitting thread will bottom without even starting to get tight. This would require a huge amount of teflon tape and would still be very leak prone, but the other problem is the kit doesn't supply enough plug or fitting to block all the unused port so you couldn't even use all the supplied block even if you wanted/needed. I ended up making my own aluminum block with just 1x in and 1x out, with proper NPT thread. Looks badass.

Would be nice if you would sell the fittings separately so a person could buy extra fittings.