Reseñas de clientes para VEVOR Kit de Línea de Compresor de Aire, Sistema de Tuberías de Aire Comprimido de Aluminio HDPE, a Prueba de Fugas y Fácil de Instalar, para Talleres de Garajes, 200 PSI, Azul, Ø 515 x 325 mm

Difficult to work with, very hard to get straight. Kid is not very well thought out you were more than likely need to purchase additional elbows in order to use this kit. If you don’t mind it not being straight it’s a good kid. If you are running more than 5 foot section at a time definitely recommend having a second person to help install it. Once put together sealed very well, but not very aesthetically pleasing because it’s so difficult to get straight.

The whole kit is pretty well made and easy to install. It could be supplied with a few more fittings or a choice to get more for peace of mind. My only concern is the aluminum block that they supply with the kit is useless. All of the 4 port are made using straight (parrallel) thread and all the fitting are NPT, but the thread is so loose every fitting thread will bottom without even starting to get tight. This would require a huge amount of teflon tape and would still be very leak prone, but the other problem is the kit doesn't supply enough plug or fitting to block all the unused port so you couldn't even use all the supplied block even if you wanted/needed. I ended up making my own aluminum block with just 1x in and 1x out, with proper NPT thread. Looks badass.